Vesternet Z-Wave Dimmer - Technical Support - Hubitat

The VES-ZW-DIM-001 is a Z-Wave 2-Wire Capable Dimmer and offers the following features:

  • 2-Wire (without Neutral) or 3-Wire (with Neutral) wiring and optional Bypass for flexible installation possibilities
  • Configurable for Momentary or Toggle Switches
  • 1.8A Resistive Load (0.8A Capacitive / Inductive Load)
  • Small Installation Size 45.5 x 45 x 20.3 mm
  • Smart Light Source Detection (Trailing / Leading Edge Dimming)
  • Power, Energy, Voltage & Current Metering
  • Soft Start
  • Temperature Emergency Shutoff Protection
  • Power Failure Load State Remembering
  • Z-Wave Plus V2

 

A manual for this device can be downloaded here.

Vesternet Z-Wave Device Drivers

These can be download from here.

One file is required for this particular Device:

  • Vesternet VES-ZW-DIM-001 2-Wire Capable Dimmer.groovy

 

Please report any issues with the Vesternet Z-Wave Device Drivers by submitting a technical request ticket.

This Vesternet Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).

  • Supports On, Off and Dimming Control from the Web UI.
  • Reports On, Off and Dimming Events when operated from the local switch.
  • Reports Power, Energy, Current and Voltage Meters.
  • Can be used as a "Trigger" for On, Off, Dimming and Meter Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
  • Can be used as an "Action" for On and Off and Dimming Control in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
  • Has configuration options for the default load state after power failure and for the local switch type.