Vesternet Zigbee Remote Control (12 Button) - Technical Support - Hubitat

The VES-ZB-REM-013 is a Zigbee Remote Control and offers the following features:

  • Four buttons labelled 1 - 4 with simple on / off markings
  • Two buttons labelled with S1 & S2
  • Two buttons with simple on / off markings
  • Pushed, held and released events for buttons 1 - 4
  • Pushed events for buttons S1 & S2
  • Main On / Off buttons sends pushed event for buttons 1 - 4 simultaneously
  • Candy-bar shape design
  • Indicator LED
  • Long life CR2450 Battery
  • Zigbee 3.0 works with ZigbBee ZHA & Zigbee ZLL Hubs & Bridges

 

A manual for this device can be downloaded here.

Vesternet Zigbee Device Drivers

Available here.

One file is required for this particular Device:

  • Vesternet VES-ZB-REM-013 4 Channel Remote Control.groovy

 

Please report any issues with the Vesternet Zigbee Device Drivers by submitting a technical request ticket.

This Vesternet Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).

  • Supports Pushed, Held, and Released Events for each button in Groups 1 - 4.
  • Supports Pushed Events for S1 and S2 buttons.
  • Reports Battery Level Events.
  • Can be used as a "Trigger" for Pushed, Held, and Released Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.