The VES-ZW-HLD-016 is a Z-Wave High Load Switch and offers the following features:
- 3-Wire (with Neutral) wiring
- Supports Momentary or Toggle Switches
- 16A Resistive Load (5A Capacitive / Inductive Load)
- Power, Energy, Voltage & Current Metering
- Small Installation Size 45.5 x 45 x 20.3 mm
- Power Failure Load State Remembering
- Z-Wave Plus v2 700 Series with S2 Security
A manual for this device can be downloaded here.
Vesternet Z-Wave Device Drivers
These can be downloaded from here.
One file is required for this particular Device:
- VES-ZW-HLD-016 High Load Switch Switch.groovy
Please report any issues with the Vesternet Z-Wave Device Drivers by submitting a technical request ticket.
This Vesternet Zigbee Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).
- Supports On and Off Control from the Web UI.
- Reports On and Off Events when operated from the local switch.
- Reports Power, Energy, Current and Voltage Meters.
- Can be used as a "Trigger" for On, Off and Meter Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
- Can be used as an "Action" for On and Off Control in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
- Has configuration options for Meter reporting, the default load state after power failure and for the local switch type.
