The VES-ZW-PLG-042 is a Z-Wave Plug Socket and offers the following features:
- On / Off Control
- 13A Resistive Load
- Power, Energy, Voltage & Current Metering
- Small Installation Size 79.6mm x 67.9mm x 72mm
- Configurable Load State After Power Failure
- Configurable LED State
- Z-Wave Plus 500 Series with S2 Security
A manual for this device can be downloaded here.
Vesternet Z-Wave Device Drivers
These can be downloaded from here.
One file is required for this particular Device:
- Vesternet VES-ZW-PLG-042 Plug Socket.groovy
Please report any issues with the Vesternet Z-Wave Device Drivers by submitting a technical request ticket.
This Vesternet Zigbee Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.4.0.151).
- Supports On and Off Control from the Web UI.
- Reports On and Off Events when operated from the local switch.
- Reports Power, Energy, Current and Voltage Meters.
- Can be used as a "Trigger" for On, Off and Meter Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
- Can be used as an "Action" for On and Off Control in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
- Has configuration options for Meter reporting, the default load state after power failure and for the LED state.
