The VES-ZW-PLG-042 is a Z-Wave Plug Socket and offers the following features:
- On / Off Control
- 13A Resistive Load
- Power, Energy, Voltage & Current Metering
- Small Installation Size 79.6mm x 67.9mm x 72mm
- Configurable Load State After Power Failure
- Configurable LED State
- Z-Wave Plus 500 Series with S2 Security
A manual for this device can be downloaded here.
Vesternet Z-Wave Device Configuration Files
These are officially available via the are officially available via the Z-Wave JS codebase, meaning that with a recent Z-Wave JS installation Vesternet Z-Wave devices should work out-of-the-box in Home Assistant.
Sometimes changes to the device configuration files can take a while to appear in the official Z-Wave JS codebase, so you can also download them direct from our Github repository.
Adding device configuration files manually is possible via Z-Wave JS UI if you have that available, simply navigate to your config location and create a file there, pasting in the code where appropriate.
More information on this is available in the Z-Wave JS UI documentation.
Please report any issues with the Vesternet Z-Wave Device Configuration Files by submitting a technical request ticket.
This Vesternet Device has the following features when used with our supporting Device Configuration File in Z-Wave JS (tested with Z-Wave JS UI / Z-Wave JS version 9.32.0 / 14.3.11).
- Supports On and Off Control.
- Reports On and Off Events when operated from the local switch.
- Reports Power, Energy, Current and Voltage Meters.
- Has configuration options for all available parameters.
