The VES-ZW-SWI-002 is a Z-Wave 2-Wire Capable Switch and offers the following features:
- 2-Wire (without Neutral) or 3-Wire (with Neutral) wiring and optional Bypass for flexible installation possibilities
- Configurable for Momentary or Toggle Switches
- 4.8A Resistive Load (1.4A Capacitive / Inductive Load)
- Small Installation Size 45.5 x 45 x 20.3 mm
- Temperature Emergency Shutoff Protection
- Power Failure Load State Remembering
- Z-Wave Plus V2
A manual for this device can be downloaded here.
Vesternet Z-Wave Device Configuration Files
These are officially available via the are officially available via the Z-Wave JS codebase, meaning that with a recent Z-Wave JS installation Vesternet Z-Wave devices should work out-of-the-box in Home Assistant.
Sometimes changes to the device configuration files can take a while to appear in the official Z-Wave JS codebase, so you can also download them direct from our Github repository.
Adding device configuration files manually is possible via Z-Wave JS UI if you have that available, simply navigate to your config location and create a file there, pasting in the code where appropriate.
More information on this is available in the Z-Wave JS UI documentation.
Please report any issues with the Vesternet Z-Wave Device Configuration Files by submitting a technical request ticket.
This Vesternet Device has the following features when used with our supporting Device Configuration File in Z-Wave JS (tested with Z-Wave JS UI / Z-Wave JS version 8.8.6 / 10.10.0).
- Supports On and Off Control.
- Reports On and Off Events when operated from the local switch.
- Has configuration options for all available parameters.
