The VES-ZW-SWI-002 is a Z-Wave 2-Wire Capable Switch and offers the following features:
- 2-Wire (without Neutral) or 3-Wire (with Neutral) wiring and optional Bypass for flexible installation possibilities
- Configurable for Momentary or Toggle Switches
- 4.8A Resistive Load (1.4A Capacitive / Inductive Load)
- Small Installation Size 45.5 x 45 x 20.3 mm
- Temperature Emergency Shutoff Protection
- Power Failure Load State Remembering
- Z-Wave Plus V2
A manual for this device can be downloaded here.
Vesternet Z-Wave Device Drivers
These can be downloaded from here.
One file is required for this particular Device:
- Vesternet VES-ZW-SWI-002 2-Wire Capable Switch.groovy
Please report any issues with the Vesternet Z-Wave Device Drivers by submitting a technical request ticket.
This Vesternet Z-Wave Device has the following features when used with our supporting Device Driver in the Hubitat Smart Home Controller (tested with Hubitat firmware version 2.2.6.139).
- Supports On and Off Control from the Web UI.
- Reports On and Off Events when operated from the local switch.
- Can be used as a "Trigger" for On and Off Events in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
- Can be used as an "Action" for On and Off Control in built-in Apps such as Basic Rule, Simple Automation Rules and Rule Machine.
- Has configuration options for the default load state after power failure and for the local switch type.
