Z-Wave Q&A

Question 1

Does this work with Home Assistant? View answer

Asked 2 ´years ago | Vesternet Z-Wave Switch

Question 2

Does this switch feature in the Z-Wave JS database https://devices.zwave-js.io/ for Home Assistant users? View answer

Asked 2 ´years ago | Vesternet Z-Wave High Load Switch

Question 3

Works with any bulbs? View answer

Asked 2 ´years ago | Z-Wave Plus MCO Touch Panel Switch - One Load

Question 4

Z-Wave Popp 10Years Smoke Detector without separated Siren Function View answer

Asked 2 ´years ago | Z-Wave Popp 10Years Smoke Detector without separated Siren Function

Question 5

Is this compatible with HC3? View answer

Asked 2 ´years ago | Z-Wave Donexon Varmo TZ Eco Thermostat

Question 6

Problems with Fibaro rgbw controller, drivers constantly powered View answer

Asked 2 ´years ago | Z-Wave Fibaro RGBW Controller 2

Question 7

Philio PAN03 assiciation question View answer

Asked 2 ´years ago | Z-Wave Philio In Wall Switch

Question 8

Compatibility with Samsung Smart things View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - Three Clamps (60A)

Question 9

Hi, does this work with Samsung Smart things View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - Three Clamps (60A)

Question 10

Does the door sensor work with HomeKit? View answer

Asked 2 ´years ago | Z-Wave Fibaro Universal Door & Window Sensor 2

Question 11

What chipset does this use? 500 series or 700? Thank you. View answer

Asked 2 ´years ago | Vesternet Z-Wave 2 Channel Switch

Question 12

Hello, when will the product be available? thank you View answer

Asked 2 ´years ago | Z-Wave Plus V2 Heltun High Load Switch

Question 13

Modbus View answer

Asked 2 ´years ago | Hubitat Elevation Model C-7 Hub

Question 14

is it good for outdoor use? View answer

Asked 2 ´years ago | Z-Wave Plus Sensative Strips Guard 700

Question 15

Can I us to automate plug sockets, not light switches? View answer

Asked 2 ´years ago | Z-Wave Plus AEOTEC Dual Nano przełącznik z pomiaru mocy

Question 16

Does this support MQTT ? View answer

Asked 2 ´years ago | Hubitat Elevation Model C-7 Hub

Question 17

Is the Z-Wave Plus Philio Outdoor Siren compatible with 2nd gen ring alarm system? View answer

Asked 2 ´years ago | Z-Wave Plus Philio Outdoor Siren

Question 18

What sort of housing would you recommend for this? Would a standard UK single pattress box be suitable? View answer

Asked 2 ´years ago | Vesternet Z-Wave High Load Switch

Question 19

AB - The uses states security gates, does this mean it's waterproof and suitable for outdoor use now? View answers

Asked 2 ´years ago | Z-Wave Fibaro Universal Door & Window Sensor 2

Question 20

AB - When will support for the Button be available in Vera Home Control ? View answers

Asked 2 ´years ago | Z-Wave Fibaro Button

Question 21

AB - Is it possible to wire this to a momentary wall switch? I understand this will invalidate the warranty View answers

Asked 2 ´years ago | Z-Wave Fibaro Button

Question 22

If powered by USB, can the batteries be left in to cover a power failure? View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 23

High load switch requires three wires? View answer

Asked 2 ´years ago | Vesternet Z-Wave High Load Switch

Question 24

Staircase Switches View answer

Asked 2 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Two Load

Question 25

My gates have a pair of IR photocells. Could I input this to the implant to get a notification when beam is broken? View answer

Asked 2 ´years ago | Z-Wave Fibaro Smart Implant

Question 26

Which Version are you selling, I see you list 3 Spec for different regions but which one am i ordering? View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec Z-Pi 7

Question 27

Do these strips actually have a z-wave controller as the category description states, or are they just dumb LED strips that need a z-wave controller and a power supply? Thanks View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 28

hi, will the Aeotec Smart Home work when there is no broadband connection? I am concerned that I will not be able to control things at my home when the internet is down. View answers

Asked 2 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 29

hi, will the Aeotec Smart Home work when there is no broadband connection?I am concerned that I will not be able to control things at my home when the internet is down. View answers

Asked 2 ´years ago | Aeotec SmartThings Hub (V3)

Question 30

Is this available in EU frequency? Shows US on the back of the box.Are the relays good for 240V AC? View answer

Asked 2 ´years ago | Z-Wave Plus Zooz Universal Relay

Question 31

Is this available in EU frequency? Shows US on the back of the box. Are the relays good for 240V AC? View answer

Asked 2 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 32

Hi, I wonder if I can connect this strip directly to the wire? I don't see in the advertisement any explanation how can I connect this strip. I would also like to make sure this strip can work directly with Smartthings and will not require additional hub. Regards, Gal View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 33

Hello, Will the black version be available to buy in the near future? View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 34

Hello,Will the black version be available to buy in the near future? View answer

Asked 2 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Five Buttons - White

Question 35

What frequency are this controller (Z-Wave.Me RaZberry 7 Pro (with external Antenna)) using? EU or US.RegTrygve View answer

Asked 2 ´years ago | Z-Wave.Me RaZberry 7 Pro (with external Antenna)

Question 36

could you use this with an existing wired door bell to replace the sounder? View answer

Asked 2 ´years ago | Z-Wave Fibaro Smoke Sensor

Question 37

Will this fit in a recessor AEO_DSE010 View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec Z-Pi 7

Question 38

Did it include the Rechargeable Lithium Battery in the package? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 39

Does anyone know if these are 100kbps devices? The original universal binary sensor was 40k View answers

Asked 2 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 40

Hi, anyone using it with Athom Homey ? Does it show correctly both the power and energy ? Non-USB version of the UK plug is not showing the power at all .. View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Relay x 1 Plus

Question 41

Can this be configured so that when the switch is off then power is still sent to the light bulb? I have a smart light bulb and I want to be able to use this switch to send the command to turn on and off the light and also be able to turn the smart light bulb on through an app even if the switch is off. View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 42

I have a small, simple propane fireplace with a 2 wire connection (heat only) that needs to be controlled by a battery powered thermostat. Would this work? View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec WallMote Quad

Question 43

Would this be suitable to independently control multiple infrared panel heaters? I have a fibaro HC3 and would use Aeotec multi sensors to monitor temperatures. View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec Z-Pi 7

Question 44

Do the Vesternet 2,4 & 8 button z wave wall controllers work with Vera Edge? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 45

What Z-wave frequencies does the model you are selling work on ?I'm after one that will work in Aus (919.8 MHz, 921.4 MHz) View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 46

This is a large price reduction..Does it suggest you are no longer going to stock this item EZLO ATOM V2? View answer

Asked 2 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 47

Hi,Regarding the Z-Wave Plus Aeotec Z-Stick 7, it shows “in stock soon”, what does this mean, do you happen to have more info (eta) on this? Also, I presume when I buy this product the frequency band will be comply with EU (as I am living in Holland)?Thank you in advance!Kr,Daniel View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec Z-Stick 7

Question 48

Hi, Regarding the Z-Wave Plus Aeotec Z-Stick 7, it shows âin stock soonâ, what does this mean, do you happen to have more info (eta) on this? Also, I presume when I buy this product the frequency band will be comply with EU (as I am living in Holland)? Thank you in advance! Kr, Daniel View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 49

Will these dimmers work with Zipato Zipabox 2? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Z-Pi 7

Question 50

Before buying this I wonder if anyone has tried the Smartthings Web driver reassignment as in this discussion: https://community.smartthings.com/t/fibaro-fgs-224-any-experience-dh/199429 I see @johan has asked a similar question. I cannot find any published drivers for Smartthings other than this forcing the device assignment as double switch. View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Z-Wave Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools