Z-Wave Q&A

Question 1

How long does the battery last? i.e. how long between charges? View answer

Asked 4 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 2

Asked 4 ´years ago | Z-Wave Fibaro CO Sensor

Question 3

Could the solar outdoor siren be used in conjunction with Ring Smart alarm system, which is supposedly Z-Wave compatible? View answer

Asked 4 ´years ago | Z-Wave Popp Solar Outdoor Siren 2

Question 4

Has anyone got a preview of the UI (user interface) yet. Also, will the new ui use https rather than http? View answer

Asked 4 ´years ago | Fibaro Home Center 3

Question 5

Can the 3 phase clamp measure the current direction (negative current)? For example, when power is provided to the grid (by a solar system) when self consumption is low. View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - Three Clamps (60A)

Question 6

Will this work with SmartThings to trigger scenes? View answer

Asked 4 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 7

Is this item in stock?

Asked 4 ´years ago | Fibaro Home Center 3

Question 8

When will you start shipping the HC3?

Asked 4 ´years ago | Fibaro Home Center 3

Question 9

I have a question before I purchase this unit. We have installations where we install 100’s of devices at a time in building complexes. If your unit does not support the IR command set of a particular brand of A/C, I realize it must be trained using the original remote which came with the A/C unit. Since we do 100’s of installs over the course of a couple of days, is there a more efficient way to train these units besides doing it by hand, one at a time? Please advise. Thanks. Bill View answer

Asked 4 ´years ago | Z-Wave Remotec ZXT-600 Z-Wave+ to IR Extender for AC

Question 10

On Fibaro's website for this product it shows it being able to be installed in audio equipment but there are no references to that type of setup in the manual or instructions. Has anyone tried to use the implant in any appliance to make it smart? If so I assume the compatibility will be based on the appliance and the internal wiring if it can be done. View answer

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 11

Is this product compatible with the New z wave plus V2 , 700 series protocol ? View answer

Asked 4 ´years ago | Fibaro Home Center 3

Question 12

Does this definitely support frequencies and protocols other than Z-Wave and WiFi? There’s no mention of any others on the Fibaro website. View answer

Asked 4 ´years ago | Fibaro Home Center 3

Question 13

What is the difference between Fibaro's HC2 and new HC3? How long will Fibaro support HC2? View answer

Asked 4 ´years ago | Fibaro Home Center 3

Question 14

Hi, Will you be able to transfer existing devices, scenes etc from HH2 to the HH3 or will everything have to be done from scratch again? View answer

Asked 4 ´years ago | Fibaro Home Center 3

Question 15

Do you have the EU version? Z-Wave Fibaro Wall Plug Gen5 I need something The will work with Israeli plugs View answer

Asked 5 ´years ago | Z-Wave Fibaro Wall Plug - Schuko

Question 16

Hi , its z wave 868 hz (eu) ? View answer

Asked 5 ´years ago | Z-Wave Fibaro Walli Outlet - Schuko

Question 17

Aside from the upgraded chip, how does this differ from the standard the original RGBW Controller? Are there any benefits worth upgrading for? View answer

Asked 5 ´years ago | Z-Wave Fibaro RGBW Controller 2

Question 18

How does this get physically installed? Does it need a backbox/ pattress box? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec smart boost timer switch

Question 19

Is this work with Samsung Smartthing V3 hub? Can I control the switch using google assistant via Samsung Smartthing Hub v3?

Asked 5 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 20

Is this work with Samsung Smartthing V3 hub? Can I use it to switch on and off the philips Hue smart light with Hue Bridge? View answer

Asked 5 ´years ago | Z-Wave Remotec Scene Master

Question 21

Hi, controlling through a z-wave hub (Fibaro HC2) can this turn on and off other IR controlled devices ie ceiling fans, lights TV etc? View answer

Asked 5 ´years ago | Z-Wave Remotec ZXT-600 Z-Wave+ to IR Extender for AC

Question 22

Is Z-Wave Plus Aeotec Smart Boost Timer Switch compatible with Piper. Regards, Ruairi

Asked 5 ´years ago | Z-Wave Plus Aeotec smart boost timer switch

Question 23

is it compatible with HS3 View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - Three Clamps (60A)

Question 24

How "tall" is the connector? Will it fit on top of this Raspberry Pi 4 case? https://images-na.ssl-images-amazon.com/images/I/71SXo28eeHL._SL1500_.jpg Thank you. View answers

Asked 5 ´years ago | Z-Wave.me RaZberry 2 PI GPIO Daughter Card - Gen5 - New

Question 25

you said: Popp Mains Adapter can be used to power up the Z-Wave Popp Smoke Detector with mains supply. It eliminates the need to insert batteries in your smoke detector. after we tried to install it without battery it doesn't work then we contacted aeotec support they said: The smoke detector only works with the battery inserted. The smoke detector standard stipulates this. The 12 V supply serves to support the lifetime of the device by supplying the Z-Wave circuit board with external voltage. This doubles the lifetime of the 9V battery. could you explain please? Ahmad View answer

Asked 5 ´years ago | Z-Wave Popp Mains Adapter

Question 26

Can you measure the energy through the contractor separately from the smart meter unit View answer

Asked 5 ´years ago | Qubino 32A Contactor for Smart Meter

Question 27

How do you set this to simple on/off rather than dimming. I want to use it in the UK with 2 wire circuit, toggle on off switch connected to S1 and non dimmable CFL or LED bulbs View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 28

Does this come with a Zwave licence or is that an additional cost? View answers

Asked 5 ´years ago | Z-Wave.me RaZberry 2 PI GPIO Daughter Card - Gen5 - New

Question 29

I assume that one button is included with the Doorbell? Can you please publish the dimensions of the bell (not given in the specification) and confirm that it can be battery powered. Thanks. View answers

Asked 5 ´years ago | Aeotec Button

Question 30

Is the battery rechargeable or replaceable? View answers

Asked 5 ´years ago | Z-Wave Philio Multisensor - PIR / Light / Temp - Gen5

Question 31

I bought one of these earlier in the year, am hoping to use to add functionality to an automatic gate opener. I've struggled to get it added into Homeseer correctly, only Output 1 has shown up. Have any Homeseer users had any success getting both outputs to add correctly? If so, any tips? View answer

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 32

Does this module work with wood venitian blinds? View answer

Asked 5 ´years ago | Z-Wave Fibaro Roller Shutter 3

Question 33

Hi, Can you tell me if the Vision Dimmer Bypass should work with the Fibaro Dimmer 1 module? Thanks View answer

Asked 5 ´years ago | Vision Dimmer Bypass

Question 34

Why is there no technical documentation on your site for this device? The description and spec is very poor, as well.

Asked 5 ´years ago | Z-Wave Plus Aeotec smart boost timer switch

Question 35

Can this be mounted outside? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 36

Please advise the lead time for these modules. We need to procure 5 of them as soon as available. Regards, Warwick

Asked 5 ´years ago | Z-Wave.me RaZberry 2 PI GPIO Daughter Card - Gen5 - New

Question 37

Hello Could I use this connected to the 12v bell output (I.e. the +and- terminals) in my house intruder alarm to tell my Samsung SmartThings box that the siren is ringing? This would be a remote alert as lightening frazzled the built-in comms dialler! It’s not clear to me from the manual that I could put the 12v through to say “it’s ringing” and “stopped ringing” when it’s 0v. I am also not clear on whether I will be able to configure it with ST (I don’t have the Fibaro control system), or not. Thank you in advance. Neil

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 38

Is the usb power on permanently or does it switch on and off with the main unit? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 39

Managed to put in a workaround but I found with a original style lightbulb it would cut out when I turn the brightness above 60% and then start flashing red. I've updated the config so that max power is 60% as this is just the porch light and I don't really need it that bright in there. But I'm concerned what happens if I purchase more.

Asked 5 ´years ago | Z-Wave Fibaro Walli Dimmer

Question 40

I ordered this product before 3 days. Can you tell when the item will be in stock? Thank you.

Asked 5 ´years ago | Z-Wave Fibaro Walli Dimmer

Question 41

I bought two of these to replace the previous generation ones. however, I'm unable to control these lights remotely on my Vera unit from other devices. Aeotec 4 button remote. I've seen other people who can't now remotely control these. Any ideas?

Asked 5 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 42

I have a fibaro lite home center - with sensor strips on windows and doors. Is this compatible? View answer

Asked 5 ´years ago | Z-Wave Popp Solar Outdoor Siren 2

Question 43

I have purchased this and it works fine, but I can't find a way to mount it nicely. UK backboxes and the extension plates for them have recessed mounting tabs. The switch can xxxx on to these with no problem, but it is recessed too far for the front cover to be able to clip onto the main switch housing. Please advise.

Asked 5 ´years ago | Z-Wave Fibaro Walli Dimmer

Question 44

I will be building a new house starting in a few months time and I want to implant temperature sensors in the concrete slab. I have 2 questions; firstly in the manual it says this can be burried concrete with the right protection, what would that protection be please?? Secondly, what would you recommend for protecting the string of temp tensors so they can be safely buried in the concrete and what cable would you connect them with ?? Thanks Chris

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 45

Hi, I'm using Domoticz running on a RPi, does this classify as a 'security Enabled Z-Wave Plus Controller' as specified as a requiremjent to fully utilise the Remotec ZXT-600 Z-Wave+ to IR Extender for AC ? Thanks Steve View answer

Asked 5 ´years ago | Z-Wave Remotec ZXT-600 Z-Wave+ to IR Extender for AC

Question 46

Does this support pulse counting at hardware level ? I'm looking for something to interface to water flow meters with a pulsed output. It would obviously need to store number of pulses received over a certain time period.

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 47

This appears to be a re-incarnation of the Fibaro Universal Binary Sensor which will not now recognise DS18B20 inputs although it used to do so. Is this unit any the more reliable?

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 48

I wish to use this to wirelessly (zwave) control my Danfoss thermostats (also Zwave). Can you confirm that this devise is able to do so? And, I wonder if the fan-controller can be used to automatically turn on a fan for heat-moving near the fireplace? Say, if it is 23 degree it should automatically turn on the vent. But if it is too noisy or so, I can turn down the speed? Its hard to find the exact details on this product and MCO does not reply on their website... Thanks! View answer

Asked 5 ´years ago | Z-Wave Plus MCO Home Fan Coil Thermostat - 4 Pipe

Question 49

Hi, When will the Z-Wave Fibaro Double Switch 2 be available in stock? I have been waiting for the appearance of this device around a week( View answer

Asked 5 ´years ago | Z-Wave Fibaro Double Switch 2

Question 50

Hi. Can I use 3 x 7W led bulbs and 1 x 3W led bulb on the same circuit? Or do all the bulbs need to be the same wattage? Thanks View answer

Asked 5 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Z-Wave Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools