Motion Q&A

Question 1

Is there a battery included, just so I know if i need to order a seperate one or not, Thanks. View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 2

Do these use the same motion sensor as Aeotec's Multisensor with motion, UV, humidity, vibration, temperature and lux? I'm hoping they don't as the motion sensor in the Aeotec 6-way multisensor is very poor, I have about 5-6 of them and even on the highest setting they often don't detect me even if I walk right up to them and jump around.

Asked 5 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 3

Why is the motion detection angle important in a motion sensor? View answer

Asked 29 ´days ago | Motion

Question 4

What is the maximum detection distance? View answer

Asked 1 ´month ago | Vesternet Zigbee Motion Sensor

Question 5

Does it includes illumination sensor/output in lux as well ? View answer

Asked 9 ´months ago | Vesternet Zigbee Motion Sensor

Question 6

what is the operating frequency View answer

Asked 9 ´months ago | Z-Wave Plus Aeotec MultiSensor 7

Question 7

Is there a way to adjust the sensitivity on the motion sensor or through smart things? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 8

Will it work with Hubitat alone or do you still need zigbee hub? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 9

Does this work with Smartthings? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 10

can it be mounted on ceiling and flip image upside down I don’t see any settings for this View answer

Asked 2 ´years ago | Aeotec SmartThings Cam 360

Question 11

Zigbee Frient Motion Sensor Hi does the light sensor function work with SmartThings?Thanks View answer

Asked 3 ´years ago | Zigbee Frient Motion Sensor Pro

Question 12

What Z-wave frequencies does the model you are selling work on ?I'm after one that will work in Aus (919.8 MHz, 921.4 MHz) View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 13

They were £24.99 before now £34 I'd call that a big difference.

Asked 3 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 14

Sensor 6 has several flaws. Reset button link via a piece of dodgy plastic, poor light level reading, poor UV reading.Apart from these, it was very good. Have they been addressed in Sensor 7? E.G. What range is read for the light level?Can I trust the reset mechanism? Can I assume it will work well with RaZberry? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 15

Is the Aeotec motion sensor the same as the Samsung in terms of range and sleep time after detecting motion? View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 16

Hello, I bought it a month ago. What estimated date will it there be stock? When will I receive it? View answer

Asked 3 ´years ago | Aeotec SmartThings Cam 360

Question 17

Can't add this to Homeseer - just errors on Addnode.Also, previously with version 6 I have a poe splitter to power it.With this version it doesn't seem to work and a USB to micro usb is supplied. Presumably I need to poe split differently??? ( not entirely sure why it doesn't power ) View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 18

Is the battery rechargeable or replaceable? View answers

Asked 5 ´years ago | Z-Wave Philio Multisensor - PIR / Light / Temp - Gen5

Question 19

Why has the prices gone up so much for what is just a rebrand. View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 20

When you add a Z-Wave network the sensor FGMS-001 (controller Razbery) in the settings is displayed only temperature and illumination. No tamper and motion sensor. Accordingly, they are not in applications. Removed from the network, he added, the problem is not resolved. What to do?

Asked 7 ´years ago | Z-Wave Fibaro Multi Sensor

Question 21

When will this item be in stock? View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 22

what is the size of the motion sensor? View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 23

Seeing as this product it battery operated and always monitoring temperature, lux reading and motion detection, how long does a battery typically last on this? View answer

Asked 6 ´years ago | Z-Wave Fibaro Multi Sensor

Question 24

is this using 868.4Hz frequency? View answer

Asked 6 ´years ago | Z-Wave Fibaro Multi Sensor

Question 25

Is this Trisensor replacing the Aeotec Multisensor 6, which has 6 different sensors?

Asked 5 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 26

Is it support EU frequency (868.42)? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 27

Is it compatible with google assistant? Can I stream it through a Google Nest Hub?

Asked 3 ´years ago | Aeotec SmartThings Cam 360

Question 28

How easy is it to get these working with smartthings?

Asked 6 ´years ago | Z-Wave Philio Multisensor - Door / PIR / Light / Temp - Gen5

Question 29

How close does the door open sensor need to be to the main unit? View answer

Asked 3 ´years ago | Z-Wave Philio Multisensor - Door / PIR / Light / Temp - Gen5

Question 30

Hi, can this camera send images/video to my PC using FTP or some other protocol? View answer

Asked 3 ´years ago | Aeotec SmartThings Cam 360

Question 31

hi is this light dependent . ie only work at night ? also does it work with n-cube controller?

Asked 7 ´years ago | Z-Wave Philio Motion Sensor PSP05 - Gen5

Question 32

Hi Folks. Is it feasible to use this sensor to control your central heating. If I used a fibaro relay to control the boiler could the temperature sensor be used as a thermostat to set or monitor the temperature or would I need to buy a dedicated Zwave thermostat? Any advice would be greatly appreciated. View answer

Asked 7 ´years ago | Z-Wave Fibaro Multi Sensor

Question 33

Has someone tested this device with a veraplus controller ? (Z-Wave Philio Multisensor - Door / PIR / Light / Temp - Gen5 PHI_PST02-1A)

Asked 8 ´years ago | Z-Wave Philio Multisensor - Door / PIR / Light / Temp - Gen5

Question 34

Does this work with Vera Edge ?

Asked 7 ´years ago | Z-Wave Philio Multisensor - Door / PIR / Light / Temp - Gen5

Question 35

Does this work with cats? Pet Friendly? View answer

Asked 8 ´years ago | Z-Wave Fibaro Multi Sensor

Question 36

Can this product be used outdoors? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 37

Can the unit be run from a USB / mains power supply? I don't trust the battery life claims from manufacturers. View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 38

Can the earthquake mode be ran concurrently with motion detection? View answer

Asked 8 ´years ago | Z-Wave Fibaro Multi Sensor

Question 39

Are there any special instructions for including this in a Vera Edge system. It seemed to install but will only notify about tampering and has no apparent reaction to movement other than a small fashing led. No notifications.

Asked 7 ´years ago | Z-Wave Philio Motion Sensor PSP05 - Gen5

Question 40

Whats new in this Gen 5 version? View answers

Asked 8 ´years ago | Z-Wave Fibaro Multi Sensor

Question 41

Is it resistant to condensation/waterproof? What is the operating humidity range? View answer

Asked 3 ´years ago | Z-Wave Fibaro Multi Sensor

Question 42

I bought this motion sensor and tried without success to include to my new smartthings hub v2 (UK version). Smartthings support advised me to confirm that the motion sensor is also a UK version (not a US one), as apparently the frequencies are different... Can you please confirm that this sensor works with the UK version of smartthings hub? View answers

Asked 6 ´years ago | Z-Wave Fibaro Multi Sensor

Question 43

I have one of these and a Samsung smart hub... hoping use various items from one place. The motion sensor is recognised as a door/window sensor? View answers

Asked 8 ´years ago | Z-Wave Fibaro Multi Sensor

Question 44

hello, does anyone know if this can be used with a fibaro hc2 and does it do anything else like lux, temp or humidity. thanks View answers

Asked 7 ´years ago | Z-Wave Philio Motion Sensor PSP05 - Gen5

Question 45

Does this new Z-Wave Fibaro Motion Sensor Gen5 version work with the zipabox? or is it just vera edge having problems? View answers

Asked 8 ´years ago | Z-Wave Fibaro Multi Sensor

Question 46

Will this work outside as a motion detection? View answers

Asked 8 ´years ago | Z-Wave Fibaro Multi Sensor

Question 47

Does this work with both UI5 and UI7? View answers

Asked 8 ´years ago | Z-Wave Fibaro Multi Sensor

Question 48

If powered by USB, can the batteries be left in to cover a power failure? View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 49

Why is weather resistance important for outdoor motion sensors? View answer

Asked 29 ´days ago | Motion

Question 50

What are the benefits of a light sensor in motion detectors? View answer

Asked 29 ´days ago | Motion

Motion Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools