Homey Bridge Compatible Q&A

Question 1

will this work without wires using a Samsung Smarthiung V3 hub View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec WallMote Quad

Question 2

Will this work as a Zigbee repeater in 2 wire configuration View answer

Asked 8 ´months ago | Vesternet Zigbee Switch

Question 3

Can this be configured so that when the switch is off then power is still sent to the light bulb?I have a smart light bulb and I want to be able to use this switch to send the command to turn on and off the light and also be able to turn the smart light bulb on through an app even if the switch is off. View answer

Asked 2 ´years ago | Z-Wave TKB Single Paddle Wall Dimmer TZ35S - Gen5

Question 4

Will this module work with my motor? View answer

Asked 9 ´months ago | Vesternet Z-Wave Motor Controller

Question 5

Can you confirm if the Shelly Gas Sensor comes with a UK plug? Thanks! View answer

Asked 1 ´month ago | Shelly Gas CNG

Question 6

High load switch requires three wires? View answer

Asked 2 ´years ago | Vesternet Z-Wave High Load Switch

Question 7

When might I need to use the Bypass accessory? View answer

Asked 9 ´months ago | Vesternet Zigbee Switch

Question 8

I need some for information on the specifications of the device. View answer

Asked 9 ´months ago | Vesternet Z-Wave Motor Controller

Question 9

What's the difference between this and the first version? View answers

Asked 6 ´years ago | Yale Smart Living Z-Wave Module 2

Question 10

When will Aeotec Wallmote double be available for UK installation & quad back in stock? View answers

Asked 7 ´years ago | Z-Wave Plus Aeotec WallMote Quad

Question 11

Does this switch supports dimmable LED lights? View answer

Asked 6 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 12

Hi, can this operate as a simple on/off switch without the dimmable feature? Thanks in advance. View answer

Asked 2 ´years ago | Z-Wave TKB Single Paddle Wall Dimmer TZ35S - Gen5

Question 13

Does the module support slat rotation / tilting? View answer

Asked 9 ´months ago | Vesternet Zigbee Motor Controller

Question 14

Vesternet zigbee motor controller positioning. View answers

Asked 2 ´years ago | Vesternet Zigbee Motor Controller

Question 15

Is this module compatible with my Zigbee Hub? View answer

Asked 9 ´months ago | Vesternet Zigbee Motor Controller

Question 16

I need a manual. View answer

Asked 9 ´months ago | Vesternet Zigbee Motor Controller

Question 17

Can this relay report the energy usage of the load connected to it? View answer

Asked 8 ´years ago | Z-Wave Qubino Flush 1D Relay Plus

Question 18

Do these use the same motion sensor as Aeotec's Multisensor with motion, UV, humidity, vibration, temperature and lux? I'm hoping they don't as the motion sensor in the Aeotec 6-way multisensor is very poor, I have about 5-6 of them and even on the highest setting they often don't detect me even if I walk right up to them and jump around.

Asked 5 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 19

does it work with Samsung smart things? View answer

Asked 8 ´years ago | Z-Wave Popp Weather Station

Question 20

Will this fit in uk back box View answer

Asked 1 ´year ago | Z-Wave Fibaro Walli Dimmer

Question 21

Does this opener it work with NO (normally open) strike locks? View answer

Asked 6 ´years ago | Z-Wave Popp Electronic Door Opener Controlmodule

Question 22

Can I use the module with other switch types such as toggle, rotary, touch or center-off-retractive? View answer

Asked 9 ´months ago | Vesternet Z-Wave Motor Controller

Question 23

Does this work with Samsung Smarthings? View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 24

Does this work with the Yale YMF 40 Mortise Lock?

Asked 6 ´years ago | Yale Smart Living Z-Wave Module 2

Question 25

Is this the EU version (868 MHz)? View answer

Asked 2 ´years ago | Yale Smart Living Z-Wave Module 2

Question 26

Can someone explain dry / volrage free contacts? Trying to decide which module to use for controlling some outside lights. View answers

Asked 8 ´years ago | Z-Wave Qubino Flush 1D Relay Plus

Question 27

Can I use this device to trigger logic in my Zigbee Hub? View answer

Asked 9 ´months ago | Vesternet Zigbee Wall Controller - 2 Button

Question 28

So I have this bulb now, it's connected to my vera plus, I can get it to dim and switch on/off. How to i change the color with in vera. Thanks

Asked 5 ´years ago | Z-Wave Plus Aeotec LED Bulb 6 Multi-White (E27)

Question 29

What size is it, and is it at all waterproof? View answer

Asked 1 ´month ago | Philio Smart Keypad

Question 30

Does the smoke alarm still work if the z wave controller is off-line? View answer

Asked 2 ´years ago | Z-Wave Popp 10Years Smoke Detector without separated Siren Function

Question 31

Can you please send us a screen shot of the User Interface in the app? what options does it give us? View answer

Asked 2 ´years ago | Z-Wave Qubino Flush Shutter Plus

Question 32

Could you provide the dimensions of the zigbee remote dimmer and frame? View answer

Asked 1 ´month ago | Zigbee Aduro Dimming Remote

Question 33

Hi, me again, I asked the below question but gave the wrong terminology. I was referring to the swivel base unit. Thanks Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you Answers (1) Anonymous 28/10/2020 If you mean the recessor adapter ( https://www.vesternet.com/products/z-wave-aeotec-recessor-for-multisensor-6 ) then the dimensions are listed in the product details ( 1.2cm above surface, 4.4cm below surface )

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 34

Hi, is it possible to remove the logo from the front easily? View answer

Asked 3 ´years ago | Z-Wave Plus MCO Home Glass Touch Dimmer

Question 35

Hi would this be compatable with a wired ring video doorbell to allow me to open a gate remotely View answer

Asked 3 ´years ago | Z-Wave Popp Electronic Door Opener Controlmodule

Question 36

Hi I am unable to get the Fibaro FGS-224 Double Smart Module to work with Samsung SmartThings Hub v3. I have managed to get it to pair with the v3 hub but only as a generic multifunction device. Only one channel works as a switch. Regards Johan View answer

Asked 3 ´years ago | Z-Wave Fibaro Double Smart Module

Question 37

Hi do you know if these support Triac dimmable as required by these downlights ? https://www.electrical2go.co.uk/jcc-v50-colour-selectable-fixed-fire-rated-led-downlight-7w-650lm-ip65-white.html Thanks Rob View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 38

Where is the Aeotec bypass? Aeotec's website still says that it will be available "early 2017", and yet here we are here in September and I cannot see much evidence of its availability. Does anyone have any insights into when it will be available? Thanks. View answer

Asked 7 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 39

Hello,Will the black version be available to buy in the near future? View answer

Asked 2 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Five Buttons - White

Question 40

does this can be use as range extender (mesh). as you know most of z-wave product that work on battery dont transmite to thier Neighbors command but z-wave ac plug product do View answer

Asked 4 ´years ago | Z-Wave Plus Popp Smoke Sensor with controllable Siren (2-in-1)

Question 41

Which bypass do you recommend & stock, for use with lighting loads below 4 watts? View answer

Asked 7 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 42

Do you have the EU version? Z-Wave Fibaro Wall Plug Gen5 I need something The will work with Israeli plugs View answer

Asked 4 ´years ago | Z-Wave Fibaro Wall Plug - Schuko

Question 43

Dear Sir i want ask you about the switch in wich frequency do u have it . and do have it in stock . Thanks View answer

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Five Buttons - White

Question 44

Why do these show as requiring a fuse whereas other like the Fibaro do not show this as a requirement in the wiring diagrams? View answer

Asked 7 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 45

Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 46

Will it work with Fibaro (Home Center 2)?

Asked 5 ´years ago | Z-Wave Plus Secure SES303 Temperature & Humidity Sensor Gen5

Question 47

Can you confirm I would receive the newer version of the ZMNHOD1 module? With updated flash And S7 firmware. The older ones have H1S5P1 printed on the sticker after the model number ZMNHOD1, these cannot be updated to the S7 firmware. Thanks View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Shutter DC

Question 48

Can this MCO MH7H-EH V2 thermostat be used to control both Electric Under Floor heating and a Towel warmer, but both independantly from each other please?If not, is there an alternative product which can do this ?Many thanks,Richard BlatchBoxford Suffolk View answer

Asked 3 ´years ago | Z-Wave Plus MCO Home Electrical Heating Thermostat with Humidity Sensor - V2

Question 49

Can this be mounted outside? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 50

Will it work with Mydlink hub GCH-G020 ? ( Z-wave secure wall switch) View answer

Asked 8 ´years ago | Z-Wave Plus Secure Wall Switch

Homey Bridge Compatible Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools