Is there a UK plug version available? View answer
Asked 4 ´years ago | Z-Wave Plus Aeotec Smart Switch 7
Does this module work with the Hunter Douglas M25S 24V motor used in Luxaflex Duette blinds? https://motorisation.hde.nl/wired/24V/Motors/M25S/M25S-data-sheet/M25S-data-sheet.pdf On paper it all looks good but I know sometimes that doesn't work out in practice when motors have soft start/stop View answer
Asked 4 ´years ago | Z-Wave Qubino Flush Shutter DC
If I put the relay on momentary mode and press the momentary switch once (and release), the light that connect to relay output will stay at ON (toggle) till I press the momentry again, is that correct? If so, does it means that for 2 way implementation I just need 2 momentry switches connect in parallel to the same input at the qubino 2 relay and every press on one of the momentry switch will toggle the light to ON or OFF? I can't find such suggestion in you app notes guides. Thank you! View answer
Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus
Why does the Aeotec Multi 6 report a 23 lux when my Philips Hue sensor reports 14606 lux in virtually the same position. I've tried it with 3 Aeotec Multi 6s now with the same sort of difference, I'm concerned because I want to use to switch on lighting when required? They even report 0 lux when there is enough light to read a book! View answers
Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6
Has anyone managed to get these working with HomeSeer v3? I am having difficulties getting all four switches to function in HS3. All four Lights function, but my use case needs the binary switches, not the lights. Every time I exclude and include it's a different combination of Switches that don't work. The lights have worked every time so far. View answer
Asked 4 ´years ago | Z-Wave Plus Aeotec WallMote Quad
I'm about to include this item in my system run by a Vera Edge. The inclusion routine on the Edge offers me the PAT02-C (flood sensor) and the PAT02-B (Temp/Humidity sensor) and a number of other Philio sensors but not the PAT02-A which is this item. Any suggestion what I should choose? I am reluctant to go with Generic Z-Wave device because experience has taught me this does not work well with multi element devices. View answer
Asked 4 ´years ago | Z-Wave Philio Multisensor - Flood / Temp / Humidity - Gen5
does this price include VAT View answer
Asked 4 ´years ago | Z-Wave Fibaro CO Sensor
I am thinking of buying a srt 321 to manage two electric radiators that have one zwave switch each. Is it possible to associate TWO nodeids in group 2 (on/off group) with the thermostat? Some forums say that you only can associate with one nodeid. Yes, I know that I can create scenes and automations in the controller, but I would like to do it locally as it is in the guesthouse and communication is not always reliable. View answer
Asked 4 ´years ago | Z-Wave Plus Secure Wall Thermostat with LCD display
I have a question before I purchase this unit. We have installations where we install 100’s of devices at a time in building complexes. If your unit does not support the IR command set of a particular brand of A/C, I realize it must be trained using the original remote which came with the A/C unit. Since we do 100’s of installs over the course of a couple of days, is there a more efficient way to train these units besides doing it by hand, one at a time? Please advise. Thanks. Bill View answer
Asked 4 ´years ago | Z-Wave Remotec ZXT-600 Z-Wave+ to IR Extender for AC
Hi , its z wave 868 hz (eu) ? View answer
Asked 4 ´years ago | Z-Wave Fibaro Walli Outlet - Schuko
At description it says: "and can also be operated by third-party controllers which support 'Thermostat Mode SET' commands or 'Binary Switch SET' commands." this is bit confusing, will it work with something like smart things hub or hubitat hub? for same idea, as one person already asked, like zoned heating with smart zwave trv's.? View answer
Asked 4 ´years ago | Z-Wave Plus Secure Boiler Receiver HRT Gen5
Is this compatible with Vera Plus?
Asked 4 ´years ago | Z-Wave Plus Aeotec Doorbell 6
What Bypass should be used in a 2-Wire installation? The manual says; "When installing the Mini Dimmer, with LED loads, in a 2-wired installation, if the load connected to the output starts flickering, we recommend you use a Bypass." I have installed it in to a 2-wire installation with an LED light and it is flickering. The Aeotech and Fibaro dimmers all say that only their own bypass modules are compatible, is this also the case with the Qubino dimmers? View answer
Asked 5 ´years ago | Z-Wave Plus Qubino Mini Dimmer
Hi does this support LED bulbs? View answer
Asked 5 ´years ago | Z-Wave Plus Qubino Mini Dimmer
Will this device work fully with Hc2? Thanks View answer
Asked 5 ´years ago | Z-Wave Plus Qubino Mini Dimmer
Can you install your own ringtones?
Asked 5 ´years ago | Z-Wave Plus Aeotec Doorbell 6
Does this module work with wood venitian blinds? View answer
Asked 5 ´years ago | Z-Wave Fibaro Roller Shutter 3
