Homey Bridge Compatible Q&A

Question 1

Hi, is this compatible with Futurehome smarthub? (Model: CUBE-1V1-EU) View answer

Asked 3 ´years ago | Z-Wave Plus Eurotronic Air Quality Sensor Z-Wave Plus (VOC Sensor)

Question 2

How do these behave after a power cut is restored? Can the behaviour be configured like hue bulbs, for example last state? Thanks.

Asked 3 ´years ago | Zigbee Aduro B22 Bulb - Tunable Colour

Question 3

Hi would this be compatable with a wired ring video doorbell to allow me to open a gate remotely View answer

Asked 3 ´years ago | Z-Wave Popp Electronic Door Opener Controlmodule

Question 4

what is the z-wave frequency, i assume it is 868mhz? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Range Extender 6 - UK Socket

Question 5

Hi, I have one of these (SCS317) and haven't had much success adding it in to my Homey network, other than a generic device. Any advice or tips on how to add this would be gratefully received. Thanks View answer

Asked 3 ´years ago | Z-Wave Plus Secure 7 Day Programmable Room Thermostat

Question 6

I see you only have the EU version in stock. What is the difference to the UK version, is it just the plug? ie could I simply put a UK plug on an EU version or use an adapter? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 7

Would this work with a LightwaveRF Hub? View answer

Asked 3 ´years ago | Z-Wave Remotec Scene Master

Question 8

Is it support EU frequency (868.42)? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 9

Does this 'smart cable' have a physical power switch, similar to the discontinued Swwidinter zwave cord switches, or is it remote control only.

Asked 3 ´years ago | Zigbee Frient Smart Cable 2

Question 10

What’s the rated inductive load in amps for this? Many thanks. View answer

Asked 3 ´years ago | Zigbee Frient Smart Cable 2

Question 11

Does this integrate into smasung smartthings like the fire detector? View answer

Asked 3 ´years ago | Zigbee Frient Intelligent Heat Alarm

Question 12

I plan to use these for patio and window drop-arm awnings. The awning company supply the following motors: - the awning uses a Somfy Orea WT 35/17 - the drop arms use a Somfy Orea WT 15/17 Can anyone advise whether these Fibaro Roller Shutter 3s are compatible and if there is anything in particularly that I need to be alert of in installing? View answer

Asked 3 ´years ago | Z-Wave Fibaro Roller Shutter 3

Question 13

I have several Qubino Mini Dimmer modules in my current set up - HomeSeer with Aeotec Z-Stick controller. Can I substitute one of these for the Qubino module? View answer

Asked 3 ´years ago | Vesternet Z-Wave Dimmer

Question 14

Hi, I'm assuming I'll be able to control the Zigbee Popp Smart Thermostat via my Homey Hub. Can you confirm please? Many thanks David View answer

Asked 3 ´years ago | Zigbee Popp Smart Thermostat

Question 15

Can these alarms link together, so if one senses smoke they all go off? View answer

Asked 3 ´years ago | Z-Wave Plus Heiman Smart Smoke Sensor 2

Question 16

Will the switch send instant status updates back to Vera? To answer the review where this wasn't working I ended up finding the solution here https://community.ezlo.com/t/heltun-he-tps04-and-vera-lite-experience/217229

Asked 3 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Four Buttons - White

Question 17

What is the length of the new Q-Reader lead between the pulse module and the data logger. I have a long distance (approximately 22m) between the meter (located next to road) and the house and propose to connect the pulse module to the requisite cores of a CAT5e cable (already laid underground) and then connect the Q-Reader within the house where it can connect via z-wave to my hub. Is this proposal possible if the cable is not long enough? View answer

Asked 3 ´years ago | Z-Wave Data Logger for E-Meters

Question 18

Does it include an acceleration sensor (accelerometer or any kind of vibration sensor) for door knocker detection? View answer

Asked 3 ´years ago | Z-Wave Technisat Door/Window Sensor

Question 19

Would this work with an existing KwikSet deadbolt? Thanks. View answer

Asked 3 ´years ago | Z-Wave and Bluetooth Poly-Control Danalock V3

Question 20

Can you confirm I would receive the newer version of the ZMNHOD1 module? With updated flash And S7 firmware. The older ones have H1S5P1 printed on the sticker after the model number ZMNHOD1, these cannot be updated to the S7 firmware. Thanks View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Shutter DC

Question 21

Hi, is this smoke detector compatible with Samsung SmartThings Hub? View answer

Asked 3 ´years ago | Homey Bridge Compatible > Z-Wave Plus Abus Z-Wave Smoke Sensor

Question 22

Available as UK three pin yet? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Smart Switch 7

Question 23

When will this items be on stock :AEOTEC Smartthings motion sensor,door sensor, button ,etc. View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 24

Hello, I have an issue with Hubitat's z-wave range, does this device also function as a z-wave repeater? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 25

When will smart buttons will be in stock I have one on order about 8 weeks approx and want to order more items all out of stock In antisipation Harvey View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Button

Question 26

Will this pair with the ring alarm system for use in the uk View answer

Asked 3 ´years ago | Z-Wave Plus Heiman Smart Smoke Sensor 2

Question 27

As this can be powered from a 5V supply, and I already have wiring in place bringing 12V to existing alarm system sensor locations, does anyone know if there is an off-the-shelf 12V -> 5V converter that will do the job? There is a reference to such a thing in a question from 2017, but nothing that I can find to buy off-the-shelf. Thanks! View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 28

Is there any reason why these Fibaro Roller Shutter 3 models will not work with a 4 wire 230V AC curtain motor (open, close, neutral, earth)? View answer

Asked 3 ´years ago | Z-Wave Fibaro Roller Shutter 3

Question 29

Have NorthQ updated this product to a Q-Reader? View answer

Asked 3 ´years ago | Z-Wave Data Logger for E-Meters

Question 30

Dear Vesternet, Works Heatit z-smoke correct with fibaro HC3? Thanks. Enrico Kersten View answer

Asked 3 ´years ago | Z-Wave Heatit Z-Smoke Detector - 230V

Question 31

When do you expect these back in stock? It's the only one missing from me placing an order for about 6 units. View answer

Asked 3 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 32

Hi Is it possible to interlink two or more of these Z-Wave smoke sensors ? So when one detects smoke and sounds its siren alarm, to have a second smoke sensor also sound its siren ? I cannot see anything in the user manual and using either Group 1 or 2 association groups doesn't seem to work. Thanks View answer

Asked 4 ´years ago | Z-Wave Plus Heiman Smoke Sensor

Question 33

If the mains adapter is used with this, can the battery still be used as a backup power source if the mains power is cut? View answer

Asked 4 ´years ago | Z-Wave Plus Popp Smoke Sensor with controllable Siren (2-in-1)

Question 34

Philio 2 in 1 Temperature/Humidity Sensor. What is accuracy of measurements? What is battery life if polling every 30 minutes? View answer

Asked 4 ´years ago | Z-Wave Philio 2 in 1 Temperature / Humidity Sensor - Gen5

Question 35

Does this work with Samsung Smarthings? View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 36

Does this require neutral or can it replace a lightswitch in a 2 wire setup? View answer

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Two Buttons - White

Question 37

When is this thermostat going to be available? Also, will it work an electric underfloor heating system?

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Heating Thermostat

Question 38

Hello, I'm looking to update my secure 321 Thermostat with something that looks a bit more modern but it needs to be battery driven do you have anything that will work with the secure 2 channel receiver I just purchased from you, thanks View answer

Asked 4 ´years ago | Z-Wave Plus MCO Home Fan Coil Thermostat - 2 Pipe - Black

Question 39

Hi, me again, I asked the below question but gave the wrong terminology. I was referring to the swivel base unit. Thanks Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you Answers (1) Anonymous 28/10/2020 If you mean the recessor adapter ( https://www.vesternet.com/products/z-wave-aeotec-recessor-for-multisensor-6 ) then the dimensions are listed in the product details ( 1.2cm above surface, 4.4cm below surface )

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 40

Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 41

Hello I bought one of these from you a few years ago, I dont think it is zwave plus, are these new ones? thanks View answer

Asked 4 ´years ago | Z-Wave Plus Secure Wall Thermostat with LCD display

Question 42

Will this be able to control 2-way lighting circuits? View answer

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Four Buttons - White

Question 43

Hi, Will this work with Samsung SmartThings, controlling the duo switch independently. If not, can you advise what switches will? Thanks View answer

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Two Buttons - White

Question 44

does this can be use as range extender (mesh). as you know most of z-wave product that work on battery dont transmite to thier Neighbors command but z-wave ac plug product do View answer

Asked 4 ´years ago | Z-Wave Plus Popp Smoke Sensor with controllable Siren (2-in-1)

Question 45

Is this compatible and will reliably work with Vera Secure? View answer

Asked 4 ´years ago | Z-Wave Plus Popp Flow Stop 2

Question 46

Hi, Will this switch work with gateway such as Vera and Homey? And when do you plan to have it in stock. Thanks! View answer

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Five Buttons - White

Question 47

Is the relay single pole or double pole (ie does it switch only the live connection or both L and N connections)? View answer

Asked 4 ´years ago | Z-Wave Heatit Z-Relay - 25A

Question 48

There is no mention about power supply in the spec or how to use. I assume its batteries? Standard 2032s? View answers

Asked 4 ´years ago | Z-Wave Plus Popp Flow Stop 2

Question 49

I have several of these devices and wish to use them with Home Assistant. I have managed to lose the little document that came with them. Can you tell me what values I should use to know when the sensor has detected smoke, please? Many thanks, John Chapman View answer

Asked 4 ´years ago | Z-Wave Plus Heiman Smoke Sensor

Question 50

Hi do you know if these support Triac dimmable as required by these downlights ? https://www.electrical2go.co.uk/jcc-v50-colour-selectable-fixed-fire-rated-led-downlight-7w-650lm-ip65-white.html Thanks Rob View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Homey Bridge Compatible Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools