As this can be powered from a 5V supply, and I already have wiring in place bringing 12V to existing alarm system sensor locations, does anyone know if there is an off-the-shelf 12V -> 5V converter that will do the job? There is a reference to such a thing in a question from 2017, but nothing that I can find to buy off-the-shelf. Thanks! View answer
Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 6
Hi Is it possible to interlink two or more of these Z-Wave smoke sensors ? So when one detects smoke and sounds its siren alarm, to have a second smoke sensor also sound its siren ? I cannot see anything in the user manual and using either Group 1 or 2 association groups doesn't seem to work. Thanks View answer
Asked 4 ´years ago | Z-Wave Plus Heiman Smoke Sensor
Does this work with Samsung Smarthings? View answer
Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus
Hello, I'm looking to update my secure 321 Thermostat with something that looks a bit more modern but it needs to be battery driven do you have anything that will work with the secure 2 channel receiver I just purchased from you, thanks View answer
Asked 4 ´years ago | Z-Wave Plus MCO Home Fan Coil Thermostat - 2 Pipe - Black
Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6
I have several of these devices and wish to use them with Home Assistant. I have managed to lose the little document that came with them. Can you tell me what values I should use to know when the sensor has detected smoke, please? Many thanks, John Chapman View answer
Asked 4 ´years ago | Z-Wave Plus Heiman Smoke Sensor
Will I be able to use the RaZberry 2 with it's Z-way software as a secondary controller on my Hubitat to analyse Z Wave Network and remove any ghost nodes and troubleshoot any routing issues. I know this is possible with Silicon labs PC controller and a UZB Stick but I do not own a PC. View answer
Asked 4 ´years ago | Z-Wave.me RaZberry 2 PI GPIO Daughter Card - Gen5 - New
Is there a UK plug version available? View answer
Asked 4 ´years ago | Z-Wave Plus Aeotec Smart Switch 7
Does this module work with the Hunter Douglas M25S 24V motor used in Luxaflex Duette blinds? https://motorisation.hde.nl/wired/24V/Motors/M25S/M25S-data-sheet/M25S-data-sheet.pdf On paper it all looks good but I know sometimes that doesn't work out in practice when motors have soft start/stop View answer
Asked 4 ´years ago | Z-Wave Qubino Flush Shutter DC
If I put the relay on momentary mode and press the momentary switch once (and release), the light that connect to relay output will stay at ON (toggle) till I press the momentry again, is that correct? If so, does it means that for 2 way implementation I just need 2 momentry switches connect in parallel to the same input at the qubino 2 relay and every press on one of the momentry switch will toggle the light to ON or OFF? I can't find such suggestion in you app notes guides. Thank you! View answer
Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus
Why does the Aeotec Multi 6 report a 23 lux when my Philips Hue sensor reports 14606 lux in virtually the same position. I've tried it with 3 Aeotec Multi 6s now with the same sort of difference, I'm concerned because I want to use to switch on lighting when required? They even report 0 lux when there is enough light to read a book! View answers
Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6
will this work with fibaro dimmer 1 ? View answer
Asked 4 ´years ago | Z-Wave Plus Aeotec Nano Dimmer Bypass
Has anyone managed to get these working with HomeSeer v3? I am having difficulties getting all four switches to function in HS3. All four Lights function, but my use case needs the binary switches, not the lights. Every time I exclude and include it's a different combination of Switches that don't work. The lights have worked every time so far. View answer
Asked 4 ´years ago | Z-Wave Plus Aeotec WallMote Quad
I'm about to include this item in my system run by a Vera Edge. The inclusion routine on the Edge offers me the PAT02-C (flood sensor) and the PAT02-B (Temp/Humidity sensor) and a number of other Philio sensors but not the PAT02-A which is this item. Any suggestion what I should choose? I am reluctant to go with Generic Z-Wave device because experience has taught me this does not work well with multi element devices. View answer
Asked 4 ´years ago | Z-Wave Philio Multisensor - Flood / Temp / Humidity - Gen5
does this price include VAT View answer
Asked 4 ´years ago | Z-Wave Fibaro CO Sensor
I am thinking of buying a srt 321 to manage two electric radiators that have one zwave switch each. Is it possible to associate TWO nodeids in group 2 (on/off group) with the thermostat? Some forums say that you only can associate with one nodeid. Yes, I know that I can create scenes and automations in the controller, but I would like to do it locally as it is in the guesthouse and communication is not always reliable. View answer
Asked 4 ´years ago | Z-Wave Plus Secure Wall Thermostat with LCD display
I have a question before I purchase this unit. We have installations where we install 100’s of devices at a time in building complexes. If your unit does not support the IR command set of a particular brand of A/C, I realize it must be trained using the original remote which came with the A/C unit. Since we do 100’s of installs over the course of a couple of days, is there a more efficient way to train these units besides doing it by hand, one at a time? Please advise. Thanks. Bill View answer
Asked 4 ´years ago | Z-Wave Remotec ZXT-600 Z-Wave+ to IR Extender for AC
