Home Assistant Compatible Q&A

Question 1

Will this sensor work with a Secure SIR321 switch? My SIR321 only has two terminals for the temperature probe. View answer

Asked 2 ´years ago | Z-Wave Secure Sonde de température numérique pour tuyaux et réservoirs - Fil de 4m

Question 2

is it good for outdoor use? View answer

Asked 2 ´years ago | Z-Wave Plus Sensative Strips Guard 700

Question 3

Is it working in israeli z wave? 916 mhz View answer

Asked 2 ´years ago | Z-Wave and Bluetooth Poly-Control Danalock V3

Question 4

confusion regarding model View answer

Asked 2 ´years ago | Z-Wave Plus Secure Wall Thermostat with LCD display

Question 5

Is this available in EU frequency? Shows US on the back of the box.Are the relays good for 240V AC? View answer

Asked 3 ´years ago | Z-Wave Plus Zooz Universal Relay

Question 6

Hi, I wonder if I can connect this strip directly to the wire? I don't see in the advertisement any explanation how can I connect this strip. I would also like to make sure this strip can work directly with Smartthings and will not require additional hub. Regards, Gal View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 7

Hello,Will the black version be available to buy in the near future? View answer

Asked 3 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Five Buttons - White

Question 8

Is this the EU version (868 MHz)? View answer

Asked 3 ´years ago | Yale Smart Living Z-Wave Module 2

Question 9

Did it include the Rechargeable Lithium Battery in the package? View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 10

Hi, anyone using it with Athom Homey ? Does it show correctly both the power and energy ? Non-USB version of the UK plug is not showing the power at all .. View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 1 Plus

Question 11

Can this be configured so that when the switch is off then power is still sent to the light bulb? I have a smart light bulb and I want to be able to use this switch to send the command to turn on and off the light and also be able to turn the smart light bulb on through an app even if the switch is off. View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 12

Would this be suitable to independently control multiple infrared panel heaters?I have a fibaro HC3 and would use Aeotec multi sensors to monitor temperatures. View answer

Asked 3 ´years ago | Z-Wave Heatit Z-Din 616

Question 13

Do the Vesternet 2,4 & 8 button z wave wall controllers work with Vera Edge? View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 14

This is a large price reduction..Does it suggest you are no longer going to stock this item EZLO ATOM V2? View answer

Asked 3 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 15

Before buying this I wonder if anyone has tried the Smartthings Web driver reassignment as in this discussion: https://community.smartthings.com/t/fibaro-fgs-224-any-experience-dh/199429 I see @johan has asked a similar question. I cannot find any published drivers for Smartthings other than this forcing the device assignment as double switch. View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 16

LED Light Strip Warm White - 2700 Kelvin ...... - is this dimmable using Fibaro universal dimmer 2 ? View answer

Asked 3 ´years ago | Z-Wave Plus Secure Wall Thermostat with LCD display

Question 17

Should I expect the internal battery to be reporting at 60% when fresh out of the box?Does it charge overtime? View answer

Asked 3 ´years ago | Z-Wave Heatit Z-Smoke Detector - 230V

Question 18

Are these for UK or EU sockets? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Range Extender 7 (Double Pack)

Question 19

Hi, Is this device compatible with EU zwave standarsd, or it is only for US zwave protocol? View answer

Asked 3 ´years ago | Yale Keyless Connected Smart Lock - Connected Ready - No Module

Question 20

Is there a button on the plug-switch to enable me to over-ride the light etc on/off please? View answer

Asked 3 ´years ago | Z-Wave Plus Secure Smart Plug Switch

Question 21

I was wondering if I could use the SIR321 to control an immersion heater in my hot water tank, using the thermostat cable under the jacket so that I can monitor the temperature in the tank ? View answer

Asked 3 ´years ago | Z-Wave Plus Secure Wall Switch

Question 22

Is the battery replaceable? View answer

Asked 3 ´years ago | Z-Wave Plus Heiman Smoke Sensor

Question 23

Can you please confirm which version of ZigBee this interface uses? Is it Hue ort SmartThings compatible? The photo doesn't show a ZigBee logo and suggests that it is 2.4GHz RF only control? View answer

Asked 3 ´years ago | Zigbee Controller For RGB And CCT LED Strip

Question 24

How is this different from the earlier version? View answer

Asked 3 ´years ago | Z-Wave Plus Heiman Smart Smoke Sensor 2

Question 25

Hi, is this compatible with Futurehome smarthub? (Model: CUBE-1V1-EU) View answer

Asked 3 ´years ago | Z-Wave Plus Eurotronic Air Quality Sensor Z-Wave Plus (VOC Sensor)

Question 26

Hi, I have one of these (SCS317) and haven't had much success adding it in to my Homey network, other than a generic device. Any advice or tips on how to add this would be gratefully received. Thanks View answer

Asked 3 ´years ago | Z-Wave Plus Secure 7 Day Programmable Room Thermostat

Question 27

This says Pi4 compatible but in the supporting documentation it says "not without un-powered USB hub)". Some have said that this is the latest version of this Z-stick but according to the Aeotec site there is a later version called Aeotec Gen5+ which is compatible with a Pi4 without having to use a USB hub. Anyone able to clarify this please? View answers

Asked 3 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 28

Do you have to have smartthings to go with this bridge or does the bridge connect directly to to my WiFi router ? Thank you View answer

Asked 3 ´years ago | Danalock Danabridge

Question 29

Can these alarms link together, so if one senses smoke they all go off? View answer

Asked 4 ´years ago | Z-Wave Plus Heiman Smart Smoke Sensor 2

Question 30

Will the switch send instant status updates back to Vera? To answer the review where this wasn't working I ended up finding the solution here https://community.ezlo.com/t/heltun-he-tps04-and-vera-lite-experience/217229

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Four Buttons - White

Question 31

Is this also compatible with the Raspberry Pi 400 running Home Assistant? Or is there a suitable alternative I should look at? View answers

Asked 4 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 32

Is this the latest (2019, green) version of this board, or the slightly earlier (2018, blue) version? Obviously the photo shows a blue one, but good to know for sure! View answer

Asked 4 ´years ago | Z-Wave.me RaZberry 2 PI GPIO Daughter Card - Gen5 - New

Question 33

Would this work with an existing KwikSet deadbolt? Thanks. View answer

Asked 4 ´years ago | Z-Wave and Bluetooth Poly-Control Danalock V3

Question 34

Can you confirm I would receive the newer version of the ZMNHOD1 module? With updated flash And S7 firmware. The older ones have H1S5P1 printed on the sticker after the model number ZMNHOD1, these cannot be updated to the S7 firmware. Thanks View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Shutter DC

Question 35

Is this device the same as the Z wave Gen 5 +? The Gen 5 (older version) is not compatible with Raspberry Pi, however, the Gen 5 + is, refer Aeotec info: https://aeotec.com/z-wave-usb-stick/ View answer

Asked 4 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 36

Will this pair with the ring alarm system for use in the uk View answer

Asked 4 ´years ago | Z-Wave Plus Heiman Smart Smoke Sensor 2

Question 37

As this can be powered from a 5V supply, and I already have wiring in place bringing 12V to existing alarm system sensor locations, does anyone know if there is an off-the-shelf 12V -> 5V converter that will do the job? There is a reference to such a thing in a question from 2017, but nothing that I can find to buy off-the-shelf. Thanks! View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 38

Dear Vesternet, Works Heatit z-smoke correct with fibaro HC3? Thanks. Enrico Kersten View answer

Asked 4 ´years ago | Z-Wave Heatit Z-Smoke Detector - 230V

Question 39

Hi Is it possible to interlink two or more of these Z-Wave smoke sensors ? So when one detects smoke and sounds its siren alarm, to have a second smoke sensor also sound its siren ? I cannot see anything in the user manual and using either Group 1 or 2 association groups doesn't seem to work. Thanks View answer

Asked 4 ´years ago | Z-Wave Plus Heiman Smoke Sensor

Question 40

Does this work with Samsung Smarthings? View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 41

Does this require neutral or can it replace a lightswitch in a 2 wire setup? View answer

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Two Buttons - White

Question 42

When is this thermostat going to be available? Also, will it work an electric underfloor heating system?

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Heating Thermostat

Question 43

Hi, me again, I asked the below question but gave the wrong terminology. I was referring to the swivel base unit. Thanks Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you Answers (1) Anonymous 28/10/2020 If you mean the recessor adapter ( https://www.vesternet.com/products/z-wave-aeotec-recessor-for-multisensor-6 ) then the dimensions are listed in the product details ( 1.2cm above surface, 4.4cm below surface )

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 44

Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 45

Hello I bought one of these from you a few years ago, I dont think it is zwave plus, are these new ones? thanks View answer

Asked 4 ´years ago | Z-Wave Plus Secure Wall Thermostat with LCD display

Question 46

Will this be able to control 2-way lighting circuits? View answer

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Four Buttons - White

Question 47

Hi, Will this work with Samsung SmartThings, controlling the duo switch independently. If not, can you advise what switches will? Thanks View answer

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Two Buttons - White

Question 48

I have a Danalock and want to remotely open the lock when away from the house, will this allow me to do this on my phone with 4g or do I require to have wifi signal ? View answer

Asked 4 ´years ago | Danalock Danabridge

Question 49

Hi, Will this switch work with gateway such as Vera and Homey? And when do you plan to have it in stock. Thanks! View answer

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Five Buttons - White

Question 50

Is the relay single pole or double pole (ie does it switch only the live connection or both L and N connections)? View answer

Asked 4 ´years ago | Z-Wave Heatit Z-Relay - 25A

Home Assistant Compatible Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools