Home Assistant Compatible Q&A

Question 1

Can I connect the module N/L to 230V while Q and I1,2,3 are being used with a 24VDC device? View answers

Asked 6 ´years ago | Z-Wave Qubino Flush Relay x 1 Plus

Question 2

Can this be used in a single phase environment to monitor different subset of the grid? (powerpoint, lighting & environmental)? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - Three Clamps (60A)

Question 3

Dear all, Is this model support for Z-Wave directly? Or we should buy one more Z-wave module? Thank you. C??ng. View answer

Asked 6 ´years ago | Yale Keyless Connected Smart Lock - Connected Ready - No Module

Question 4

Hi, has anyone had any joy linking with with Samsung Smartthings? Thx

Asked 6 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 5

Hello. Anyone know if these are shipping with more recent firmware these days? I do not have a Fibaro controller, and have no plans to invest in one, so wouldn't be able to update if they aren't already up to date... Thanks.

Asked 6 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 6

Why do you list this as compatible with Anthony Homey? Like many so called compatible brands, Homey relies on 3rd party or community developers to write drivers (they call them Apps), and the various developers haven't added compatibility for this or original Yale Connected Keyfree), despite requests. Now that the lock is discontinued, I doubt it ever will be. View answers

Asked 6 ´years ago | Yale Smart Living Z-Wave Module 2

Question 7

Can this be used (with the Zipato Zipabox) to perform OTA updates of other devices on the Z-Wave network?

Asked 6 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 8

Does this work with the Yale YMF 40 Mortise Lock?

Asked 6 ´years ago | Yale Smart Living Z-Wave Module 2

Question 9

What's the average battery life expectancy?

Asked 6 ´years ago | Z-Wave Plus Aeotec Recessed Door Sensor

Question 10

Has anyone got this (Yale Smart Living Z-Wave Module 2) to work with the Zipato Zipabox?

Asked 6 ´years ago | Yale Smart Living Z-Wave Module 2

Question 11

What's the difference between this and the first version? View answers

Asked 6 ´years ago | Yale Smart Living Z-Wave Module 2

Question 12

Hello, Can this touch Panel control shutters or blinds? Thank you View answer

Asked 6 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Two Load - UK

Question 13

I'm about to pull the trigger on the Conexis L1 and Z-Wave Module 2 for my Fibaro HC2 but I'm hearing lots of reports of the module draining the 4 AA batteries in the Conexis L1 lock, like Malath A mentioned in the review section of this product on Vesternet Does anyone have more insight into this? Thanks Andy

Asked 6 ´years ago | Yale Smart Living Z-Wave Module 2

Question 14

Are they shipping with v1.11 firmware? Short of buying a usb device too there is no way to upgrade via smartthings. View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 15

Hi, can you use the temperature sensor within the fibaro motion sensor with the trv instead of its dedicated sensor? View answer

Asked 6 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 16

is this Gen5 ? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 17

How can I configure this device for low water level detection? And how can I disable the optical and acoustical signal? View answer

Asked 6 ´years ago | Z-Wave Philio Multisensor - Flood / Temp / Humidity - Gen5

Question 18

Does this module work with Fibaro? View answers

Asked 6 ´years ago | Yale Smart Living Z-Wave Module 2

Question 19

is this z-wave plus ?? View answer

Asked 6 ´years ago | Yale Smart Living Z-Wave Module 2

Question 20

I was seriously thinking about buying one of these for a house I am buying off plan but put off by the fact that this cannot be installed in direct sunlight and needs to be protected from rain. How can this be used as an external door entry system if it can’t be used outside? Also, with the camera, can I hook this up to an NVR to record the live stream like a CCTV camera? If the above can be confirmed, that would be great! Thanks, Hal View answer

Asked 6 ´years ago | Fibaro Intercom

Question 21

Can this control module act as a momentary switch? View answer

Asked 6 ´years ago | Z-Wave Popp Electronic Door Opener Controlmodule

Question 22

As this can be immersed in water for low water level detection, can it give the temperature of the water. I was thinking of using this in a fish tank for water temp readings. View answer

Asked 6 ´years ago | Z-Wave Philio Multisensor - Flood / Temp / Humidity - Gen5

Question 23

Does this opener it work with NO (normally open) strike locks? View answer

Asked 6 ´years ago | Z-Wave Popp Electronic Door Opener Controlmodule

Question 24

I have a fused Switch controlling a fan and want to use this controller to operate the fan remotely as well as enabling the fused switch to continue controlling the fan at the wall, is there a wiring diagram showing how to achieve this? View answers

Asked 6 ´years ago | Z-Wave Plus Aeotec Nano Switch On/Off Controller

Question 25

Is it fully compatible with Vera ? View answer

Asked 6 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 26

Hi There. I'm confused how the heat controller on each Rad will "call" for heat on a standard UK boiler system. Surely there needs to be something on the boiler end to call the heat when the radiator valve asks for it? View answer

Asked 6 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 27

If I want to change batteries after installation, the whole housing will shoot up in to the insulation since theres no retention ring holding back the housing when I take the sensor out. It makes it near impossible to change batteries unless I'm able to get to the sensor from the backside. How do I do this?

Asked 7 ´years ago | Z-Wave Philio Motion Sensor PSP05 with Round Recessor - Gen5

Question 28

On OSX, are there any economical ways to get IFTTT type behaviour from the Z-stick (eg raising Apple events) - or Indigo the only game in town other than DIY? View answers

Asked 7 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 29

Will this work if Vera light, ive seem reports it does not ? View answers

Asked 7 ´years ago | Z-Wave Plus Secure SES303 Temperature & Humidity Sensor Gen5

Question 30

How is this powered please? Battery / mains? Thanks View answers

Asked 7 ´years ago | Z-Wave Philio Multisensor - Flood / Temp / Humidity - Gen5

Question 31

Does it disconnect the neutral line as well ? View answer

Asked 7 ´years ago | Z-Wave Plus Secure Wall Switch

Question 32

Are the Aeotec switches compatible with Smartthings? View answer

Asked 7 ´years ago | Z-Wave Plus Aeotec WallMote Quad

Question 33

This installed with 4 SES002 and paired to Vera Edge. Vera reports the correct ambient temp agains the first sensor but all 4 pipe sensors report "-327.68 °". Ive checked all the connections, removed and reattached from the Zwave network etc but stays same. What can you suggest pls View answers

Asked 7 ´years ago | Z-Wave Plus Secure SES302 Temperature Sensors Gen5

Question 34

IS there a motion sensor built in? I Thought I saw info about it on a website but now can't find it? View answer

Asked 7 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 35

Hi, big fan of Vesternet. Is this sensor z-wave. Can I use this sensor to monitor anywhere or has it got to be paired with the fibaro TRV head? View answer

Asked 7 ´years ago | Z-Wave Fibaro Radiator Thermostat Sensor

Question 36

Would this work with a normal bathroom towel rad valve ? View answer

Asked 7 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 37

Why is this product's name "Z-wave...", when it does not offer Z-wave connectivity? View answer

Asked 7 ´years ago | Z-Wave Popp Mains Adapter

Question 38

does this work with the fibaro hc 2 or need some other gateway to work? View answer

Asked 7 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - Three Clamps (60A)

Question 39

Hi, is this works with Homey? Any experience?

Asked 7 ´years ago | Z-Wave Plus Secure 7 Day Programmable Room Thermostat

Question 40

Hi Team, Can I use 3 of this thermostat with with two double Fibaro or Qubino relays to control a boiler with 3 heating zones? If yes which relay do you suggest? View answer

Asked 7 ´years ago | Z-Wave Plus Secure 7 Day Programmable Room Thermostat

Question 41

Is it possible to use these to control a 240v relay without chatter? We tried this by altering parameters 11,12 and 15 but were not successful. Any advice appreciated. View answer

Asked 7 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 42

hello - wanted to ask if the device provides data per phase or as a total. thanks!

Asked 7 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - Three Clamps (60A)

Question 43

Z-Wave Fibaro KeyFob working with the Vera plus ?

Asked 7 ´years ago | Z-Wave Fibaro KeyFob

Question 44

Hey, will it work with the Vera Plus?

Asked 7 ´years ago | Z-Wave Philio 2 * 1.5 KW Relay Inserts

Question 45

Does anyone know the trick to getting full functionality (press, press and hold, double press etc.) working with Domoticz?

Asked 7 ´years ago | Z-Wave Remotec Scene Master

Question 46

Does anyone know how to reset this device if it was once included into a zwave controller in case the controller is no longer available? View answer

Asked 7 ´years ago | Z-Wave Plus MCO Home PM2.5 Air Quality Monitor - 12V

Question 47

Is anybody using this with Vera Plus and 1.7.2935 and, if so, how many functions per button is it now supporting ? View answers

Asked 7 ´years ago | Z-Wave Remotec Scene Master

Question 48

Hi there, I'm looking for a Z-wave dry contact switch, connected to my existing pilot wires from the boiler. Not really fussed about it being a thermostat, as all I need is to be able to remotely turn the heating on or off. I don't want to have to change out anything with the existing boiler's timer / programmer. I intend to leave it heating turned on at the boiler indefinitely, and the dry contact switch as the main on-off. I can then use scenes to control timing if need be. I don't think this Secure product is built for that since it needs replacing the boiler's timer / programmer. Can you kindly recommend a suitable product? Thanks in advance. View answers

Asked 7 ´years ago | Z-Wave Plus Secure Wall Thermostat with LCD display

Question 49

Can this be used with the 2 channel boiler receiver? If so, how does it manage the hot water channel? I have a Razberry but wanted this to manage in the case of its failure (and because I understand it will manage the boiler better?) View answers

Asked 7 ´years ago | Z-Wave Plus Secure Wall Thermostat with LCD display

Question 50

Is this Controller working with vera plus? View answer

Asked 7 ´years ago | Z-Wave Qubino Flush Shutter Plus

Home Assistant Compatible Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools