Brands - Aeotec Q&A

Question 1

Is there a way to adjust the sensitivity on the motion sensor or through smart things? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 2

Does it work with Schlage Connect smart deadbolt? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Button

Question 3

Hi, does this work with HC3? Lots of confusing information regarding this particular model... View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 4

will this work without wires using a Samsung Smarthiung V3 hub View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec WallMote Quad

Question 5

Does this work with the 4th gen alexa with built in zigbee, or do i still need a smarthings hub? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Button

Question 6

Can this button be setup through Google Home so you don't need the Hub? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Button

Question 7

does this button work with the Alexa echo 4? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Button

Question 8

Will this work with a hubitat? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Button

Question 9

Do you save your devices, scenes, automation programming to your cloud in case something happens and you need to s View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 10

Is this a cloud-dependent? or local-dependent? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 11

Does this require subscription? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 12

Does this work with Flic ? View answer

Asked 2 ´years ago | Aeotec SmartThings Hub (V3)

Question 13

Aeotec Smart Home vestanet Modules View answer

Asked 2 ´years ago | Aeotec SmartThings Hub (V3)

Question 14

Does this have the new z wave gen 700 series chip in it? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 15

Will it work with Hubitat alone or do you still need zigbee hub? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 16

Does this work with Smartthings? View answer

Asked 2 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 17

can it be mounted on ceiling and flip image upside down I don’t see any settings for this View answer

Asked 2 ´years ago | Aeotec SmartThings Cam 360

Question 18

Aeotec Z-Stick Gen5 vs Aeotec Z-Stick View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec Z-Stick 7

Question 19

Compatibility with Samsung Smart things View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - Three Clamps (60A)

Question 20

Hi, does this work with Samsung Smart things View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - Three Clamps (60A)

Question 21

Can I us to automate plug sockets, not light switches? View answer

Asked 2 ´years ago | Z-Wave Plus AEOTEC Dual Nano przełącznik z pomiaru mocy

Question 22

If powered by USB, can the batteries be left in to cover a power failure? View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 23

Is this available with a UK plug? The pictures show European power pins. View answer

Asked 2 ´years ago | Aeotec Zigbee Range Extender Zi

Question 24

Which Version are you selling, I see you list 3 Spec for different regions but which one am i ordering? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Z-Pi 7

Question 25

Do these strips actually have a z-wave controller as the category description states, or are they just dumb LED strips that need a z-wave controller and a power supply? Thanks View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 26

hi, will the Aeotec Smart Home work when there is no broadband connection? I am concerned that I will not be able to control things at my home when the internet is down. View answers

Asked 3 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 27

hi, will the Aeotec Smart Home work when there is no broadband connection?I am concerned that I will not be able to control things at my home when the internet is down. View answers

Asked 3 ´years ago | Aeotec SmartThings Hub (V3)

Question 28

Hi, I wonder if I can connect this strip directly to the wire? I don't see in the advertisement any explanation how can I connect this strip. I would also like to make sure this strip can work directly with Smartthings and will not require additional hub. Regards, Gal View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 29

Hello, Will the black version be available to buy in the near future? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 30

Will this fit in a recessor AEO_DSE010 View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Z-Pi 7

Question 31

Does anyone know if these are 100kbps devices? The original universal binary sensor was 40k View answers

Asked 3 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 32

I have a small, simple propane fireplace with a 2 wire connection (heat only) that needs to be controlled by a battery powered thermostat. Would this work? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec WallMote Quad

Question 33

Is there a Device Handler so that this works with smartthings? Although Frient is listed as a partner when adding a device, the keypad is not listed ?? Alternatively, maybe another keypad so I can use it with a konnected alarm panel for deactivation by Guest_vs. View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 34

Would this be suitable to independently control multiple infrared panel heaters? I have a fibaro HC3 and would use Aeotec multi sensors to monitor temperatures. View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Z-Pi 7

Question 35

What Z-wave frequencies does the model you are selling work on ?I'm after one that will work in Aus (919.8 MHz, 921.4 MHz) View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 36

This is a large price reduction..Does it suggest you are no longer going to stock this item EZLO ATOM V2? View answer

Asked 3 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 37

Hi,Regarding the Z-Wave Plus Aeotec Z-Stick 7, it shows “in stock soon”, what does this mean, do you happen to have more info (eta) on this? Also, I presume when I buy this product the frequency band will be comply with EU (as I am living in Holland)?Thank you in advance!Kr,Daniel View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Z-Stick 7

Question 38

Hi, Regarding the Z-Wave Plus Aeotec Z-Stick 7, it shows âin stock soonâ, what does this mean, do you happen to have more info (eta) on this? Also, I presume when I buy this product the frequency band will be comply with EU (as I am living in Holland)? Thank you in advance! Kr, Daniel View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 39

Will these dimmers work with Zipato Zipabox 2? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Z-Pi 7

Question 40

Hi, will this remote work with Vera so it can arm and disarm the alarm? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 41

Can't add this to Homeseer - just errors on Addnode.Also, previously with version 6 I have a poe splitter to power it.With this version it doesn't seem to work and a USB to micro usb is supplied. Presumably I need to poe split differently??? ( not entirely sure why it doesn't power ) View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 42

Are these for UK or EU sockets? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Range Extender 7 (Double Pack)

Question 43

Is this supplied with a schuko-to-UK adapter? View answer

Asked 3 ´years ago | Aeotec Range Extender 7 - EU Socket

Question 44

The marketing and product box for this item promotes that you can plug it in and power it from a nearby socket. They show this in the manual for the US 110v version , but for the UK/EU 230v version it suggests it has to be hard wired into the main consumer unit ?As I have a socket right next to the consumer unit? Please could someone explain why I can’t connect the power cable to a UK plug and power it, rather than pay for an electrician to hardwire it? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 45

Sensor 6 has several flaws. Reset button link via a piece of dodgy plastic, poor light level reading, poor UV reading.Apart from these, it was very good. Have they been addressed in Sensor 7? E.G. What range is read for the light level?Can I trust the reset mechanism? Can I assume it will work well with RaZberry? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 46

what is the size of the motion sensor? View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 47

what is the z-wave frequency, i assume it is 868mhz? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Range Extender 6 - UK Socket

Question 48

This says Pi4 compatible but in the supporting documentation it says "not without un-powered USB hub)". Some have said that this is the latest version of this Z-stick but according to the Aeotec site there is a later version called Aeotec Gen5+ which is compatible with a Pi4 without having to use a USB hub. Anyone able to clarify this please? View answers

Asked 3 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 49

I see you only have the EU version in stock. What is the difference to the UK version, is it just the plug? ie could I simply put a UK plug on an EU version or use an adapter? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 50

Is it support EU frequency (868.42)? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Trisensor

Brands - Aeotec Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools