Brands - Aeotec Q&A

Question 1

Is there a UK plug version available? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Smart Switch 7

Question 2

Would this be able to control non dimmable LEDs? View answer

Asked 4 ´years ago | Z-Wave Plus AEOTEC Dual Nano przełącznik z pomiaru mocy

Question 3

Would you have the UK version (3 pin) version ? Thanks Alan. View answer

Asked 4 ´years ago | Aeotec Range Extender 7 - EU Socket

Question 4

Hi Just a follow-up question about import/export power. Is this able to monitor flow direction from one clamp -> i.e. whether my solar system is exporting or not to the grid? Mitul View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 5

Hi, how well does this work with SmartThings and in particular the energy monitoring? Many thanks Mark View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec smart boost timer switch

Question 6

How well does this device work in Smartthings and in particular will Smartthings report power usage? Many thanks View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec smart boost timer switch

Question 7

Please can you provide a guide to use the aeotec nano shutter to motorise Venetian blinds for tilt, raise and lower? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Nano Shutter

Question 8

Why does the Aeotec Multi 6 report a 23 lux when my Philips Hue sensor reports 14606 lux in virtually the same position. I've tried it with 3 Aeotec Multi 6s now with the same sort of difference, I'm concerned because I want to use to switch on lighting when required? They even report 0 lux when there is enough light to read a book! View answers

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 9

will this work with fibaro dimmer 1 ? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Nano Dimmer Bypass

Question 10

Can this Aeotec button connect directly to Smartthings? View answer

Asked 4 ´years ago | Aeotec Button

Question 11

Has anyone managed to get these working with HomeSeer v3? I am having difficulties getting all four switches to function in HS3. All four Lights function, but my use case needs the binary switches, not the lights. Every time I exclude and include it's a different combination of Switches that don't work. The lights have worked every time so far. View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec WallMote Quad

Question 12

Can the 3 phase clamp measure the current direction (negative current)? For example, when power is provided to the grid (by a solar system) when self consumption is low. View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - Three Clamps (60A)

Question 13

How does this get physically installed? Does it need a backbox/ pattress box? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec smart boost timer switch

Question 14

Is this compatible with Vera Plus?

Asked 4 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 15

Does this come with a UK plug socket or a European plug socket? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Siren 6

Question 16

Is Z-Wave Plus Aeotec Smart Boost Timer Switch compatible with Piper. Regards, Ruairi

Asked 5 ´years ago | Z-Wave Plus Aeotec smart boost timer switch

Question 17

is it compatible with HS3 View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - Three Clamps (60A)

Question 18

How do you set this to simple on/off rather than dimming. I want to use it in the UK with 2 wire circuit, toggle on off switch connected to S1 and non dimmable CFL or LED bulbs View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 19

Hi Does this come with a UK standard 3 point plug? I'm trying to create a set up where I have a magnetic strip sensor on a door that will chime once opened and also send an alert to my phone. Do you know if this could be achieved, using this in conjunction with a smart things hub? Thanks View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Siren 6

Question 20

I assume that one button is included with the Doorbell? Can you please publish the dimensions of the bell (not given in the specification) and confirm that it can be battery powered. Thanks. View answers

Asked 5 ´years ago | Aeotec Button

Question 21

If the z-wave controller is temporarily offline will the chime still sound when the button is pressed, or is all functionality entirely dependent on the z-wave network?

Asked 5 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 22

Does the siren/doorbell unit fit directly into a UK 3-pin socket or does it require a euro-adaptor?

Asked 5 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 23

Can you install your own ringtones?

Asked 5 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 24

Why is there no technical documentation on your site for this device? The description and spec is very poor, as well.

Asked 5 ´years ago | Z-Wave Plus Aeotec smart boost timer switch

Question 25

Why should i use this product? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Nano Dimmer Bypass

Question 26

Can you clarify what this means, in real terms, "Battery operated possible: 1x PT502035 (400mAh) (only for bridging)"? Can I use it as doorbell with just the batteries or does it have to be plugged in?

Asked 5 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 27

Can these fit into one of the "Aeotec Recessor for MultiSensor 6" per chance, even if they are not designed too? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 28

Can this be mounted outside? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 29

Is the usb power on permanently or does it switch on and off with the main unit? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 30

Is this model come with a UK plug ?

Asked 5 ´years ago | Z-Wave Plus Aeotec Siren 6

Question 31

Can this product be used outdoors? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 32

Can the unit be run from a USB / mains power supply? I don't trust the battery life claims from manufacturers. View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 33

Is this Trisensor replacing the Aeotec Multisensor 6, which has 6 different sensors?

Asked 5 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 34

Do these use the same motion sensor as Aeotec's Multisensor with motion, UV, humidity, vibration, temperature and lux? I'm hoping they don't as the motion sensor in the Aeotec 6-way multisensor is very poor, I have about 5-6 of them and even on the highest setting they often don't detect me even if I walk right up to them and jump around.

Asked 5 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 35

So I have this bulb now, it's connected to my vera plus, I can get it to dim and switch on/off. How to i change the color with in vera. Thanks

Asked 5 ´years ago | Z-Wave Plus Aeotec LED Bulb 6 Multi-White (E27)

Question 36

Im attempting to use this with HomeSeer, has anyone else managed to use a backup & restore function with the same set up ?

Asked 5 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 37

I've currently got an AEON S2 installed in my Domoticz environment with a fairly large network of devices. Some of them are in pretty inaccessible spaces. I'm now considering changing the controller but I need to be sure that I can transfer the configuration without re-including the devices. Gareth

Asked 5 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 38

The manual shows this can handle 200A ? I need a single phase meter to cover 100A - will this one work? if not which one will? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 39

Hello, you did not mention the frequency of z-wave signal? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 40

Can the temperature sensitivity be increased using parameters to change the bit length of the temperature sensor?

Asked 6 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 41

How do I programme the Aeon Labs Clamp meter to record import & export units on Vera Plus?

Asked 6 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 42

what frequency this item is US/EU? View answer

Asked 6 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 43

Is there a reason why this has to be hardwired into the main circuit box panel rather than a plug? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 44

Can this be used in a single phase environment to monitor different subset of the grid? (powerpoint, lighting & environmental)? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - Three Clamps (60A)

Question 45

The manual suggests this unit must be installed behind an Air Break Switch. Is this confirmed? As far as I was aware, air break switches are only used in the distribution network?

Asked 6 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 46

Can this be used (with the Zipato Zipabox) to perform OTA updates of other devices on the Z-Wave network?

Asked 6 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 47

What's the average battery life expectancy?

Asked 6 ´years ago | Z-Wave Plus Aeotec Recessed Door Sensor

Question 48

Are they shipping with v1.11 firmware? Short of buying a usb device too there is no way to upgrade via smartthings. View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 49

It can be used to turn on/off power for an entire apartment (of course without the hub) if currently I have a 32A common switch? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 50

Does it work with Samsung SmartThings Hub (F-HUB-UK-V2)? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Brands - Aeotec Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools