Brands - Aeotec Q&A

Question 1

What does the physical switch attached to this device do? does it activate the dimming or does it just enable/disable the whole device? Forgive the naiivety of the question, I'm still a noob at this View answer

Asked 7 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 2

How is this better than the Fibaro Dimmer 2 (which I just bought)? "outperforms all that has come before it" is quite a grand claim - is it just compatible with a broader selection of LED bulbs? View answer

Asked 7 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 3

Which bypass do you recommend & stock, for use with lighting loads below 4 watts? View answer

Asked 8 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 4

When will Aeotec Wallmote double be available for UK installation & quad back in stock? View answers

Asked 8 ´years ago | Z-Wave Plus Aeotec WallMote Quad

Question 5

Can this be controlled locally via SmartThings if there is no internet connection? It is possible to link a Z-Wave remote to it directly? View answers

Asked 8 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 6

Out of stock within 3 days of email saying in stock. Pointless. Bad. How to lose customers.

Asked 8 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 7

Does Z-Wave Aeon Labs Clamp Power Meter Gen5 - One Clamp (60A) sense current direction, ie import or export of power? View answers

Asked 8 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 8

Will this sensor work with an Aeotec Z-Stick V2 (Version: 1.4-2228-gbce4a88-dirty)?

Asked 8 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 9

QNAP, OpenHAB + Aeon Labs Z-Stick USB, possible? I'm guessing this is possible, there is a package for OpenHab that will install on QNAP, so if I stick this USB stick into the back of the QNAP box will I be good to go? View answer

Asked 8 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 10

Can this be used in a bathroom? View answers

Asked 8 ´years ago | Aeotec Recessor (for MultiSensors & TriSensors)

Question 11

Has anyone figured out how to set the light and humidity thresholds? The manual gives parameter values, sizes and hex/decimal descriptions but setting them don't match and the default values don't match the ones in the manuals, they aren't even close. Trying to set values gives me "Failed to set user settings" in my Vera Edge. View answers

Asked 8 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 12

Will it work wit fibaro HC Lite? View answer

Asked 8 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 13

Does this stick battery prevent it from forgetting the network routing? I bought the UZB and whenever i unplug it from the pc or just reboot the pc, all routing is reset and it starts all over again resulting many times in dead nodes.. Is this the correct behaviour? Dow the Aeon stick do the same? View answers

Asked 8 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 14

when will you have more of these in stock? i have been waiting what seems forever to see a UK Version.. View answers

Asked 8 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 15

Can you advise what size the switch is?, I couldn't see it in the document. Or do you have more photographs of it from various angles next to an existing zwave socket like the tkb? View answers

Asked 8 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 16

Hi is this forUK sockets? Does this unit also act as a repeater for the network View answer

Asked 8 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 17

Hi, Will the device perform the same activities when powered by battery as it will when powered by usb? Thanks View answers

Asked 8 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 18

Please can you tell me the maximum load (W) the UK version of this switch can handle? View answers

Asked 8 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - Schuko

Question 19

Can this be used with Fibaro Smoke and Water sensons, with just a notebook and some tools without a Home Center ? View answers

Asked 8 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 20

Can this be used as a secondary device with another remote? View answers

Asked 8 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 21

Will this allow me to set z-wave parameters on individual devices using my Mac? View answers

Asked 8 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 22

Hi, Has anyone used this with the Vera Plus and UI7 (1.7.1786). If so did all of the sensors show up and work as expected? Thanks. View answer

Asked 8 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 23

link this to wifi if poss ? View answer

Asked 9 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 24

Will this unit work with a Fibaro Home Centre 2? View answer

Asked 9 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 25

Does this unit report both current consumption (in W or Kw) as well as accumulated consumption (kWh)? View answers

Asked 9 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 26

Has anyone used the Aeon Labs Multisensor 6 - Gen5 on a VeraLite (UI5 1.5.622)? Did all sensors report correctly? View answer

Asked 9 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 27

When will the UK plug type be available for this product? View answers

Asked 9 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - Schuko

Question 28

Is this MultiSensor 6 in EU Frequency? View answers

Asked 9 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 29

Can the sensitivity be set so pets are ignored? View answers

Asked 9 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Brands - Aeotec Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools