Question 1

Will this pair with the ring alarm system for use in the uk View answer

Asked 3 ´years ago | Z-Wave Plus Heiman Smart Smoke Sensor 2

Question 2

Will this sensor work with an Aeotec Z-Stick V2 (Version: 1.4-2228-gbce4a88-dirty)?

Asked 8 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 3

Will this unit work with a Fibaro Home Centre 2? View answer

Asked 8 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 4

Will this work in the states? View answer

Asked 4 ´years ago | Athom Homey Pro

Question 5

Will this work with a PWM Immersion heater (ie. one that can very it's power). Other meters give false readings for me when it's on.

Asked 7 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - Three Clamps (60A)

Question 6

will this work with fibaro dimmer 1 ? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Nano Dimmer Bypass

Question 7

will this work with samsung smarthings? View answer

Asked 8 ´years ago | Z-Wave Philio Multisensor - Light / Temp / Door - Gen5

Question 8

Will this work with Smartthings? View answer

Asked 8 ´years ago | Z-Wave Philio Smart Colour Button Gen5

Question 9

Will this work with the latest Aeotec Nano Dimmer for which does not have a bypass available yet? I cannot beleive that the internals will be much difference between provisors - basically some additional resistance and capacitance added. Has anyone tied this and can report compatability? View answer

Asked 7 ´years ago | Z-Wave Fibaro Dimmer Bypass 2

Question 10

Will this work with the new smart gas meters. (EDF have installed a Flonidan branded Smart Gas Meter but it cannot connect to the mobile telephone network so cant get at the data)

Asked 7 ´years ago | Z-Wave Data Logger for E-Meters

Question 11

Would there be a minimum GU10 number of lights that would not need a Fibaro dimmer 2 ? I have a number of circuits with GU10 lights 6W X 9 in a kitchen and out in a hallway 2 way circuits of 2 each by 2 and a circuit of 4. Would I need a dimmer bypass then for all circuits. View answer

Asked 7 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 12

Would this be able to control non dimmable LEDs? View answer

Asked 4 ´years ago | Z-Wave Plus AEOTEC Dual Nano przełącznik z pomiaru mocy

Question 13

Would this work locally "out of the box" without connecting to a central z-wave controller? I understand remote commands require a controller but would a hardwired momentary switch be able to turn on the load immediately after wiring as well? View answer

Asked 6 ´years ago | Z-Wave Fibaro Double Switch 2

Question 14

Would this work with a LightwaveRF Hub? View answer

Asked 3 ´years ago | Z-Wave Remotec Scene Master

Question 15

Would this work with a normal bathroom towel rad valve ? View answer

Asked 7 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 16

Would this work with an existing KwikSet deadbolt? Thanks. View answer

Asked 3 ´years ago | Z-Wave and Bluetooth Poly-Control Danalock V3

Question 17

Z-Wave Fibaro KeyFob working with the Vera plus ?

Asked 7 ´years ago | Z-Wave Fibaro KeyFob

Question 18

How does the thermostat in a room that is too cold turn the boiler on so that the radiator can be supplied with hot water. You can’t leave the boiler set on permanently. In most UK central heating systems there is a central thermostat and or programmer that determines when the boiler switches on or off. View answers

Asked 7 ´years ago | Z-Wave Fibaro Heat Controller

Question 19

This installed with 4 SES002 and paired to Vera Edge. Vera reports the correct ambient temp agains the first sensor but all 4 pipe sensors report "-327.68 °". Ive checked all the connections, removed and reattached from the Zwave network etc but stays same. What can you suggest pls View answers

Asked 7 ´years ago | Z-Wave Plus Secure SES302 Temperature Sensors Gen5

Question 20

This says Pi4 compatible but in the supporting documentation it says "not without un-powered USB hub)". Some have said that this is the latest version of this Z-stick but according to the Aeotec site there is a later version called Aeotec Gen5+ which is compatible with a Pi4 without having to use a USB hub. Anyone able to clarify this please? View answers

Asked 3 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 21

Hi I would like to install this into a air conditioning/ heating system would you be able to offer me some assistance if I was to supply you with the make and model no of the Ac/ Heating unit ? View answers

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 22

Hi, I can’t see the option to force a set brightness level in Domoticz when switched on, can you please tell me how I change this setting as the default is to switch on at last light level. Thanks, Steve View answers

Asked 6 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 23

Is the battery rechargeable or replaceable? View answers

Asked 5 ´years ago | Z-Wave Philio Multisensor - PIR / Light / Temp - Gen5

Question 24

Are the contacts in this model 'dry'? I want to use the module to momentarily connect a separate 12VDC circuit. (Mimicking a make/break switch.)Already have many FGS211/FGS221 modules which are dry. But want to make sure there is no change of internal circuitry for this module. View answer

Asked 3 ´years ago | Z-Wave Fibaro Double Switch 2

Question 25

Before buying this I wonder if anyone has tried the Smartthings Web driver reassignment as in this discussion:https://community.smartthings.com/t/fibaro-fgs-224-any-experience-dh/199429I see @johan has asked a similar question. I cannot find any published drivers for Smartthings other than this forcing the device assignment as double switch. View answer

Asked 2 ´years ago | Z-Wave Fibaro Double Smart Module

Question 26

Can't add this to Homeseer - just errors on Addnode.Also, previously with version 6 I have a poe splitter to power it.With this version it doesn't seem to work and a USB to micro usb is supplied. Presumably I need to poe split differently??? ( not entirely sure why it doesn't power ) View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 27

Can multiple thermostats be associated to this device? ie. Can mulitple devices call for heat via this switch ? View answer

Asked 5 ´years ago | Z-Wave Plus Secure Boiler Receiver HRT Gen5

Question 28

Can these alarms link together, so if one senses smoke they all go off? View answer

Asked 3 ´years ago | Z-Wave Plus Heiman Smart Smoke Sensor 2

Question 29

Can these fit into one of the "Aeotec Recessor for MultiSensor 6" per chance, even if they are not designed too? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 30

Can this be mounted outside? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 31

Can this MCO MH7H-EH V2 thermostat be used to control both Electric Under Floor heating and a Towel warmer, but both independantly from each other please?If not, is there an alternative product which can do this ?Many thanks,Richard BlatchBoxford Suffolk View answer

Asked 3 ´years ago | Z-Wave Plus MCO Home Electrical Heating Thermostat with Humidity Sensor - V2

Question 32

Can you confirm I would receive the newer version of the ZMNHOD1 module? With updated flash And S7 firmware. The older ones have H1S5P1 printed on the sticker after the model number ZMNHOD1, these cannot be updated to the S7 firmware. Thanks View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Shutter DC

Question 33

Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 34

Dear Sir i want ask you about the switch in wich frequency do u have it . and do have it in stock . Thanks View answer

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Five Buttons - White

Question 35

Do these strips actually have a z-wave controller as the category description states, or are they just dumb LED strips that need a z-wave controller and a power supply?Thanks View answer

Asked 2 ´years ago | LED Light Strip Warm White - 2700 Kelvin

Question 36

Do you have the EU version? Z-Wave Fibaro Wall Plug Gen5 I need something The will work with Israeli plugs View answer

Asked 4 ´years ago | Z-Wave Fibaro Wall Plug - Schuko

Question 37

does this can be use as range extender (mesh). as you know most of z-wave product that work on battery dont transmite to thier Neighbors command but z-wave ac plug product do View answer

Asked 4 ´years ago | Z-Wave Plus Popp Smoke Sensor with controllable Siren (2-in-1)

Question 38

Does this definitely support frequencies and protocols other than Z-Wave and WiFi? There’s no mention of any others on the Fibaro website. View answer

Asked 4 ´years ago | Fibaro Home Center 3

Question 39

Does this have the possibility of manual override in case Z-wave is down? I don´t see a button View answer

Asked 7 ´years ago | Qubino 32A Contactor for Smart Meter

Question 40

Hello Could I use this connected to the 12v bell output (I.e. the +and- terminals) in my house intruder alarm to tell my Samsung SmartThings box that the siren is ringing? This would be a remote alert as lightening frazzled the built-in comms dialler! It’s not clear to me from the manual that I could put the 12v through to say “it’s ringing” and “stopped ringing” when it’s 0v. I am also not clear on whether I will be able to configure it with ST (I don’t have the Fibaro control system), or not. Thank you in advance. Neil

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 41

Hello, I bought it a month ago. What estimated date will it there be stock? When will I receive it? View answer

Asked 3 ´years ago | Aeotec SmartThings Cam 360

Question 42

Hello,Will the black version be available to buy in the near future? View answer

Asked 2 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Five Buttons - White

Question 43

Hi do you know if these support Triac dimmable as required by these downlights ? https://www.electrical2go.co.uk/jcc-v50-colour-selectable-fixed-fire-rated-led-downlight-7w-650lm-ip65-white.html Thanks Rob View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 44

Hi I am unable to get the Fibaro FGS-224 Double Smart Module to work with Samsung SmartThings Hub v3. I have managed to get it to pair with the v3 hub but only as a generic multifunction device. Only one channel works as a switch. Regards Johan View answer

Asked 3 ´years ago | Z-Wave Fibaro Double Smart Module

Question 45

Hi In the picture it’s showing two readings - is one the set point and the other Actual room temp ? Which way round are there Is this compatible with Vera Plus ? View answer

Asked 3 ´years ago | Z-Wave Heatit Thermostat Z-Temp 2

Question 46

Hi would this be compatable with a wired ring video doorbell to allow me to open a gate remotely View answer

Asked 3 ´years ago | Z-Wave Popp Electronic Door Opener Controlmodule

Question 47

Hi, is it possible to remove the logo from the front easily? View answer

Asked 3 ´years ago | Z-Wave Plus MCO Home Glass Touch Dimmer

Question 48

Hi, me again, I asked the below question but gave the wrong terminology. I was referring to the swivel base unit. Thanks Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you Answers (1) Anonymous 28/10/2020 If you mean the recessor adapter ( https://www.vesternet.com/products/z-wave-aeotec-recessor-for-multisensor-6 ) then the dimensions are listed in the product details ( 1.2cm above surface, 4.4cm below surface )

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 49

Hi, Will you be able to transfer existing devices, scenes etc from HH2 to the HH3 or will everything have to be done from scratch again? View answer

Asked 4 ´years ago | Fibaro Home Center 3

Question 50

Hi,I wonder if I can connect this strip directly to the wire?I don't see in the advertisement any explanation how can I connect this strip.I would also like to make sure this strip can work directly with Smartthings and will not require additional hub.Regards,Gal View answer

Asked 2 ´years ago | Zigbee Aduro Led Strip 3 Meters

Browse by Topic

Tools