Question 1

What is the power consumption in watts? View answer

Asked 4 ´years ago | Fibaro Home Center 3

Question 2

What is the range at which the gestures will work over? And are there any materials the Swipe will not work behind, e.g. glass?

Asked 8 ´years ago | Z-Wave Fibaro Swipe

Question 3

What is the real range of this? Description has 1 square meter, but this is obviously incorrect. View answer

Asked 8 ´years ago | Z-Wave Popp Weather Station

Question 4

what is the size of the motion sensor? View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 5

what is the z-wave frequency, i assume it is 868mhz? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Range Extender 6 - UK Socket

Question 6

what kind of range should I expect for this? I have a lot of walls between where my vera is and where my 433 device is... View answer

Asked 5 ´years ago | RFXtrx433XL USB 433.92 MHz transceiver with antenna (NEW model)

Question 7

What model is this? is it the C5 Version? View answer

Asked 4 ´years ago | Hubitat Elevation Model C-7 Hub

Question 8

When controlled by the local switch, can the level be controlled e.g. press briefly to turn on/off, press and hold to cycle the brightness? View answer

Asked 7 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 9

When do you expect these back in stock? It's the only one missing from me placing an order for about 6 units. View answer

Asked 3 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 10

When is this thermostat going to be available? Also, will it work an electric underfloor heating system?

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Heating Thermostat

Question 11

When using the Dimmer 2 in a 2-way or multi-way circuit, do the momentary (bell-push) switches need to be 2-way switches or will 1-way switches work? (as the wiring is simplified when using momentary switches). Such as the Varilight 2-Gang 6A 1-Way Push-to-Make Momentary Switch? Thanks View answer

Asked 6 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 12

When was this published?

Asked 5 ´years ago | Z-Wave Essentials Book

Question 13

When will this item be in stock? View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 14

When will this items be on stock :AEOTEC Smartthings motion sensor,door sensor, button ,etc. View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 15

When will this product be in stock? View answer

Asked 5 ´years ago | Athom Homey Pro

Question 16

When will you start shipping the HC3?

Asked 4 ´years ago | Fibaro Home Center 3

Question 17

When you add a Z-Wave network the sensor FGMS-001 (controller Razbery) in the settings is displayed only temperature and illumination. No tamper and motion sensor. Accordingly, they are not in applications. Removed from the network, he added, the problem is not resolved. What to do?

Asked 7 ´years ago | Z-Wave Fibaro Multi Sensor

Question 18

Where is the Aeotec bypass? Aeotec's website still says that it will be available "early 2017", and yet here we are here in September and I cannot see much evidence of its availability. Does anyone have any insights into when it will be available? Thanks. View answer

Asked 7 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 19

Which bypass do you recommend & stock, for use with lighting loads below 4 watts? View answer

Asked 7 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 20

Which zwave dimmer modules will this work with? View answer

Asked 3 ´years ago | Vision Dimmer Bypass

Question 21

Why do these show as requiring a fuse whereas other like the Fibaro do not show this as a requirement in the wiring diagrams? View answer

Asked 7 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 22

Why has the prices gone up so much for what is just a rebrand. View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 23

Why is this only compatible to the POPP Hub? I thought all Z-Wave devices were compatible. View answer

Asked 6 ´years ago | Popp 433 Bridge - Black

Question 24

Why is this product's name "Z-wave...", when it does not offer Z-wave connectivity? View answer

Asked 7 ´years ago | Z-Wave Popp Mains Adapter

Question 25

Why should i use this product? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Nano Dimmer Bypass

Question 26

Will I be able to use the RaZberry 2 with it's Z-way software as a secondary controller on my Hubitat to analyse Z Wave Network and remove any ghost nodes and troubleshoot any routing issues. I know this is possible with Silicon labs PC controller and a UZB Stick but I do not own a PC. View answer

Asked 4 ´years ago | Z-Wave.me RaZberry 2 PI GPIO Daughter Card - Gen5 - New

Question 27

Will it be the new c-7 in stock late July ? Do you ship to Sweden? /Mattias View answer

Asked 4 ´years ago | Hubitat Elevation Model C-7 Hub

Question 28

I plan to use these for patio and window drop-arm awnings. The awning company supply the following motors: - the awning uses a Somfy Orea WT 35/17 - the drop arms use a Somfy Orea WT 15/17 Can anyone advise whether these Fibaro Roller Shutter 3s are compatible and if there is anything in particularly that I need to be alert of in installing? View answer

Asked 3 ´years ago | Z-Wave Fibaro Roller Shutter 3

Question 29

I read the following in the manual: Rated output power 8A for single output channel,13A at max.(3,25A for R.G.B.W. single output channel is suggested) I'm planing to control two strips of LED with the RGBW-Dimmer. Using two of the four channels. How much power (current) can each of the two LED-strips have? (I'm using a 24V driver). Maybe 13A/2 = 6.5A per channel? View answer

Asked 7 ´years ago | Z-Wave Qubino RGBW Dimmer Plus

Question 30

I see you only have the EU version in stock. What is the difference to the UK version, is it just the plug? ie could I simply put a UK plug on an EU version or use an adapter? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 31

I used these in the past with LED power supplies but unfortunately even though the static current was under 1 amp, after a while the power supply inrush current would weld the relay contacts closed. I put a thermistor in-line with the load to limit the inrush and Qubino said they were aware of this and working on a solution. Does anyone know if this problem has been fixed?

Asked 8 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 32

I want to use a Fibaro relay to swicth an immersion heater on and off. The load is switched using a double pole relay. Can I simply connect the Fibaro output across the relay energising contacts, or will you need a resistor in series to reduce the current? View answer

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 33

I wish to use this to wirelessly (zwave) control my Danfoss thermostats (also Zwave). Can you confirm that this devise is able to do so? And, I wonder if the fan-controller can be used to automatically turn on a fan for heat-moving near the fireplace? Say, if it is 23 degree it should automatically turn on the vent. But if it is too noisy or so, I can turn down the speed? Its hard to find the exact details on this product and MCO does not reply on their website... Thanks! View answer

Asked 5 ´years ago | Z-Wave Plus MCO Home Fan Coil Thermostat - 4 Pipe

Question 34

If I include this in a z-wave network controlled by a Vera Edge will I be able to set the 7 day schedule from the controller? View answer

Asked 9 ´years ago | Z-Wave Plus Secure 7 Day Programmable Room Thermostat

Question 35

If I mount this in a roof, what's the max angle that it can be moved to in the horizontal & what's the andle of detection?

Asked 7 ´years ago | Z-Wave Philio Motion Sensor PSP05 with Round Recessor - Gen5

Question 36

If I put the relay on momentary mode and press the momentary switch once (and release), the light that connect to relay output will stay at ON (toggle) till I press the momentry again, is that correct? If so, does it means that for 2 way implementation I just need 2 momentry switches connect in parallel to the same input at the qubino 2 relay and every press on one of the momentry switch will toggle the light to ON or OFF? I can't find such suggestion in you app notes guides. Thank you! View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 37

If I want to change batteries after installation, the whole housing will shoot up in to the insulation since theres no retention ring holding back the housing when I take the sensor out. It makes it near impossible to change batteries unless I'm able to get to the sensor from the backside. How do I do this?

Asked 7 ´years ago | Z-Wave Philio Motion Sensor PSP05 with Round Recessor - Gen5

Question 38

If the mains adapter is used with this, can the battery still be used as a backup power source if the mains power is cut? View answer

Asked 4 ´years ago | Z-Wave Plus Popp Smoke Sensor with controllable Siren (2-in-1)

Question 39

If the z-wave controller is temporarily offline will the chime still sound when the button is pressed, or is all functionality entirely dependent on the z-wave network?

Asked 5 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 40

if you have the smart living keyless lock - what is the point of this? View answer

Asked 8 ´years ago | Yale Smart Living Y3 Contemporary Nightlatch

Question 41

if You use the Dimmer 2 with toggle switches in a 3-way lighting circuit, would you be able to use all 2-way switches or would you still need to use a intermediate switch in the circuit? View answer

Asked 6 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 42

If you were using 3-position (on/off/on) switches would you need 3core+ earth cable running between all switches in a 2-way or multi-way lighting circuit? or could this be achieved with 2 core+earth cable between switches? thanks View answer

Asked 6 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 43

Im attempting to use this with HomeSeer, has anyone else managed to use a backup & restore function with the same set up ?

Asked 5 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 44

In the US they sell a touch display that plugs directly into this module but its the wrong size for the UK. Does anyone know if they will sell a UK version? View answer

Asked 7 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 45

Is it compatible with google assistant? Can I stream it through a Google Nest Hub?

Asked 3 ´years ago | Aeotec SmartThings Cam 360

Question 46

is it compatible with HS3 View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - Three Clamps (60A)

Question 47

Is it compatible with Nanoleaf smart light bulbs? View answer

Asked 8 ´years ago | Z-Wave Philio Smart Colour Button Gen5

Question 48

Is it fully compatible with Vera ? View answer

Asked 6 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 49

is it interchangeable with yrf10 ? View answer

Asked 8 ´years ago | Yale Smart Living Keyless Connected RFID Key Card

Question 50

Is it possible to change colors of the light bulb using smartthings View answer

Asked 7 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Browse by Topic

Tools