Question 1

Can a Eero with built in Zigbee work as a hub to connect the smart curtain motor? View answer

Asked 1 ´year ago | Aqara Curtain Driver E1 Rod Version

Question 2

Can this be connected directly to an echo (gen 4)? what functionality do i lose when not using the aqara hub? View answer

Asked 1 ´year ago | Aqara Curtain Driver E1 Rod Version

Question 3

Do both track and rod attachments come in the box? View answer

Asked 1 ´year ago | Aqara Curtain Driver E1 Rod Version

Question 4

Can you pair two motors together to draw heavy drapes from one side to another? View answer

Asked 1 ´year ago | Aqara Curtain Driver E1 Rod Version

Question 5

Would you be able to ask Secure about supplying this probe? I rang Secure; they directed me to google View answer

Asked 1 ´year ago | Z-Wave Secure Temperature Probe

Question 6

Can the valve position on these be controlled directly using MQTT? View answer

Asked 1 ´year ago | Shelly TRV

Question 7

Echo Dot compatibility View answer

Asked 1 ´year ago | Vesternet Zigbee 2 Channel Switch

Question 8

Once the probe is installed into the base, can the actual main device still detect water or just the probe now? View answer

Asked 1 ´year ago | Zigbee Frient Water Leak Detector Probe

Question 9

What voltage and amps does this device take? (Z-Wave.me RaZberry 2 PI GPIO Daughter Card - Gen5 - New) View answer

Asked 1 ´year ago | Support

Question 10

Would this work as a an entrance keypad to arm/disarm a smart things based security system? View answer

Asked 1 ´year ago | Zigbee Frient Keypad

Question 11

Does the Philio PAN03 work with Hubitat? Is there a driver? View answer

Asked 1 ´year ago | Z-Wave Philio In Wall Switch

Question 12

Hello, got HomeKit gateway and a Nest thermostat. Can I use this to link the thermostat to HomeKit? Thanks View answer

Asked 1 ´year ago | Aqara Hub M2

Question 13

is there a hub that links Nest thermostat and apple HomeKit View answer

Asked 1 ´year ago | Sales

Question 14

what temp/temp difference would trigger it? If my elektric bathroom heater blows on it? View answer

Asked 1 ´year ago | Zigbee Frient Intelligent Heat Alarm

Question 15

I have this linked to a HC3 but always states 'not configured' no matter how many times I try - not compatible? View answer

Asked 1 ´year ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 16

I saw it's supported by Athom Homey. However Homey doesn't have an Zooz app. How should it be connected then? View answer

Asked 1 ´year ago | Z-Wave Plus Zooz Universal Relay

Question 17

Is this a current product because I can't find any information on the NorthQ website View answer

Asked 1 ´year ago | Z-Wave Data Logger for E-Meters

Question 18

Just wondering if you shipp to Cyprus,and also would I need a Samsung Smartthings account on a UK address (region) as I saw many comments that this hubs are theoretically for US/UK market ,will it function normally with an European account via the Samsung app? Feedback much appreciated . Thanks View answer

Asked 3 ´years ago | Aeotec SmartThings Hub (V3)

Question 19

link this to wifi if poss ? View answer

Asked 8 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 20

Manual says "Maximum length of wires: 3 meters". Is that really the case and does it apply for both input and output wiring? Thinking of installing these on the DIN rail with Eutonomy housings, but 3-meter cable restriction would make this impossible. View answer

Asked 3 ´years ago | Z-Wave Fibaro Double Smart Module

Question 21

Manual says it transmits every 15mins in Normal mode. But does the message contain multiple readings or only a single reading covering the entire 15mins. I am after history with lower granularity, say 1min, but don't want to drain battery with Real-Time mode.

Asked 7 ´years ago | Z-Wave Data Logger for E-Meters

Question 22

My door is 76mm wide, do you have an extension kit for this lock? View answer

Asked 7 ´years ago | Yale Conexis L1 Smart Door Lock - Polished Chrome

Question 23

Normally when I think about DIN rails, I think about the 2 pole fuse/breakers in my house consumer unit. Where do these fit in ? Do they go in the same unit, next to the breaker for say the lighting ring/circuit I want to control/dim? Or do you recommend they go into a different unit - away from the main breakers etc? View answer

Asked 8 ´years ago | Z-Wave Qubino Din Dimmer Gen5

Question 24

On Fibaro's website for this product it shows it being able to be installed in audio equipment but there are no references to that type of setup in the manual or instructions. Has anyone tried to use the implant in any appliance to make it smart? If so I assume the compatibility will be based on the appliance and the internal wiring if it can be done. View answer

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 25

On what Mhz does it works and does it work on a HC2 from Fibaro View answer

Asked 5 ´years ago | Yale Smart Living Z-Wave Module 2

Question 26

Out of stock within 3 days of email saying in stock. Pointless. Bad. How to lose customers.

Asked 7 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 27

Philio 2 in 1 Temperature/Humidity Sensor. What is accuracy of measurements? What is battery life if polling every 30 minutes? View answer

Asked 4 ´years ago | Z-Wave Philio 2 in 1 Temperature / Humidity Sensor - Gen5

Question 28

Please advise the lead time for these modules. We need to procure 5 of them as soon as available. Regards, Warwick

Asked 5 ´years ago | Z-Wave.me RaZberry 2 PI GPIO Daughter Card - Gen5 - New

Question 29

Please can you provide a guide to use the aeotec nano shutter to motorise Venetian blinds for tilt, raise and lower? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Nano Shutter

Question 30

Please can you recommend other night latches which are compatible with the keyless smart lock. This is the only one Yale lists as compatible but I do not like it.

Asked 7 ´years ago | Yale Smart Living Y3 Contemporary Nightlatch

Question 31

Please could somebody advise me of the hole centre dimensions of the mounting bracket ? I need to fix the mounting bracket directly to an existing UK metal back box. Thank you.

Asked 3 ´years ago | Z-Wave Remotec Scene Master

Question 32

QNAP, OpenHAB + Aeon Labs Z-Stick USB, possible? I'm guessing this is possible, there is a package for OpenHab that will install on QNAP, so if I stick this USB stick into the back of the QNAP box will I be good to go? View answer

Asked 8 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 33

Seeing as this product it battery operated and always monitoring temperature, lux reading and motion detection, how long does a battery typically last on this? View answer

Asked 6 ´years ago | Z-Wave Fibaro Multi Sensor

Question 34

The blurb on this product says you can connect an external probe, but one is not supplied. The picture shows a very neat looking probe. Can anyone recommend a specific (and cost effective) probe that is known to work with this sensor? View answer

Asked 7 ´years ago | Z-Wave Fibaro Flood Sensor

Question 35

The description states that this requires a neutral wire, however the single output version of this module does not; so is that correct in the description? View answer

Asked 6 ´years ago | Z-Wave Plus AEOTEC Dual Nano przełącznik z pomiaru mocy

Question 36

The manual shows this can handle 200A ? I need a single phase meter to cover 100A - will this one work? if not which one will? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 37

The manual suggests this unit must be installed behind an Air Break Switch. Is this confirmed? As far as I was aware, air break switches are only used in the distribution network?

Asked 6 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 38

This appears to be a re-incarnation of the Fibaro Universal Binary Sensor which will not now recognise DS18B20 inputs although it used to do so. Is this unit any the more reliable?

Asked 5 ´years ago | Z-Wave Fibaro Smart Implant

Question 39

this is full compatible with vera3 ui5? View answer

Asked 8 ´years ago | Z-Wave Everspring Flood Sensor

Question 40

Use for a UK 2-wire (No neutral) switch with a 13W LED non-dimmable bulb in hallway, do I need to install with the bypass 2? View answer

Asked 7 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 41

What's the average battery life expectancy?

Asked 6 ´years ago | Z-Wave Plus Aeotec Recessed Door Sensor

Question 42

What's the difference between roller shutter 2 & 3? Are there any new features to note?

Asked 5 ´years ago | Z-Wave Fibaro Roller Shutter 3

Question 43

What Bypass should be used in a 2-Wire installation? The manual says; "When installing the Mini Dimmer, with LED loads, in a 2-wired installation, if the load connected to the output starts flickering, we recommend you use a Bypass." I have installed it in to a 2-wire installation with an LED light and it is flickering. The Aeotech and Fibaro dimmers all say that only their own bypass modules are compatible, is this also the case with the Qubino dimmers? View answer

Asked 5 ´years ago | Z-Wave Plus Qubino Mini Dimmer

Question 44

What do I kneed to by to be able for my Fibaro home center 2 to sense my hot water tank temperature will this do it or do I require additional components View answer

Asked 5 ´years ago | Z-Wave Secure Pipe Tank Digital Temperature Sensor - 4m Wire

Question 45

What does the physical switch attached to this device do? does it activate the dimming or does it just enable/disable the whole device? Forgive the naiivety of the question, I'm still a noob at this View answer

Asked 7 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 46

what frequency this item is US/EU? View answer

Asked 6 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 47

What is new from the previous version. Looks pretty the same View answer

Asked 7 ´years ago | Z-Wave Fibaro Universal Door & Window Sensor 2

Question 48

What is the average battery life in this button, how often does it need to be replaced or recharged? View answer

Asked 7 ´years ago | Z-Wave Philio Smart Colour Button Gen5

Question 49

What is the difference between Fibaro's HC2 and new HC3? How long will Fibaro support HC2? View answer

Asked 4 ´years ago | Fibaro Home Center 3

Question 50

What is the length of the new Q-Reader lead between the pulse module and the data logger. I have a long distance (approximately 22m) between the meter (located next to road) and the house and propose to connect the pulse module to the requisite cores of a CAT5e cable (already laid underground) and then connect the Q-Reader within the house where it can connect via z-wave to my hub. Is this proposal possible if the cable is not long enough? View answer

Asked 3 ´years ago | Z-Wave Data Logger for E-Meters

Browse by Topic

Tools