Question 1

Can this unit be controlled from other z-wave controllers? or is the smart meter required? View answer

Asked 7 ´years ago | Z-Wave Qubino Smart Meter ZMNHTD1 Plus

Question 2

Does this work with 3 way switched circuits? Can't find a wiring diagram for even 2way switching in the manual. View answer

Asked 7 ´years ago | Z-Wave Fibaro Double Switch 2

Question 3

Out of stock within 3 days of email saying in stock. Pointless. Bad. How to lose customers.

Asked 7 ´years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 4

How can this be set up for two-way circuits? i.e. two switches controlling one light. I can't see a wiring diagram to support this in the manual. View answers

Asked 7 ´years ago | Z-Wave Fibaro Double Switch 2

Question 5

My door is 76mm wide, do you have an extension kit for this lock? View answer

Asked 7 ´years ago | Yale Conexis L1 Smart Door Lock - Polished Chrome

Question 6

is this a straight swap for the existing Yale Smart living Keyfree multipoint lock? View answer

Asked 7 ´years ago | Yale Conexis L1 Smart Door Lock - Polished Chrome

Question 7

Does this have an outdoor IP rating? If so please could you let me know what it is?

Asked 7 ´years ago | Z-WAVE POPP Elektroninen ovi avaaja ControlModule kanssa Oven avaaja

Question 8

Does anyone know if there is a zwave module for this lock? View answers

Asked 7 ´years ago | Yale Conexis L1 Smart Door Lock - Polished Chrome

Question 9

What is the average battery life in this button, how often does it need to be replaced or recharged? View answer

Asked 7 ´years ago | Z-Wave Philio Smart Colour Button Gen5

Question 10

For Vera is changing the device type to scene controller a guaranteed way to get the single button press to work every time? View answers

Asked 8 ´years ago | Z-Wave Fibaro Button

Question 11

Does Z-Wave Aeon Labs Clamp Power Meter Gen5 - One Clamp (60A) sense current direction, ie import or export of power? View answers

Asked 8 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 12

Is this compatible with Home Assistant?

Asked 8 ´years ago | Z-Wave Fibaro Button

Question 13

does it detect carbon monoxide? View answers

Asked 8 ´years ago | Z-Wave Fibaro Smoke Sensor

Question 14

Will this sensor work with an Aeotec Z-Stick V2 (Version: 1.4-2228-gbce4a88-dirty)?

Asked 8 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 15

Is it compatible with Nanoleaf smart light bulbs? View answer

Asked 8 ´years ago | Z-Wave Philio Smart Colour Button Gen5

Question 16

Will the Z-Wave.me USB stick run on a Synology NAS using Domoticz/OpenZWave? i.e. through a Linux OS? I understand OpenZWave is fine but not sure on the OS aspect... View answers

Asked 8 ´years ago | Z-Wave.Me USB Stick

Question 17

Does this use the European or USA Z-wave frequency? View answer

Asked 8 ´years ago | Z-Wave Plus Secure Wall Switch

Question 18

If I had a chandelier with 5 X 6W LEDs (30W total) would I need a Fibaro Dimmer Bypass 2? View answers

Asked 8 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 19

QNAP, OpenHAB + Aeon Labs Z-Stick USB, possible? I'm guessing this is possible, there is a package for OpenHab that will install on QNAP, so if I stick this USB stick into the back of the QNAP box will I be good to go? View answer

Asked 8 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 20

is it interchangeable with yrf10 ? View answer

Asked 8 ´years ago | Yale Smart Living Keyless Connected RFID Key Card

Question 21

Is it suitable for outdoor? Looking to put it in a side gate so will be exposed to the elements. View answers

Asked 8 ´years ago | Z-Wave Plus Aeotec Recessed Door Sensor

Question 22

I want to use a Fibaro relay to swicth an immersion heater on and off. The load is switched using a double pole relay. Can I simply connect the Fibaro output across the relay energising contacts, or will you need a resistor in series to reduce the current? View answer

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 23

Can Vesternet or any user provide a config file for OpenZWave? I'm trying to write one but not luck.

Asked 8 ´years ago | Z-Wave Plus Secure Boiler Receiver - two channels

Question 24

Can this be used in a bathroom? View answers

Asked 8 ´years ago | Aeotec Recessor (for MultiSensor 7 & Trisensors)

Question 25

Multiple questions --> What is the difference between the bi-stable and the contactor switch ? I need to switch a load of ~ 4k W (electrical water heater) which uses a double switch (live+neutral), which one suits better ? Do u have any feedback from Vera users that have managed to add them in their network (smart meter, contactor, bi-stable) ? View answer

Asked 8 ´years ago | Qubino 32A Bistable Switch for Smart Meter

Question 26

Can this use 2 x momentary switches? Can't see a way to configure them in the guide. View answer

Asked 8 ´years ago | Z-Wave Philio 2 * 1.5 KW Power Meter Plus

Question 27

Can someone explain dry / volrage free contacts? Trying to decide which module to use for controlling some outside lights. View answers

Asked 8 ´years ago | Z-Wave Qubino Flush 1D Relay Plus

Question 28

I'm unsure if they bypass is working/broken. Does it add extra wattage to the circuit? View answer

Asked 8 ´years ago | Z-Wave Fibaro Dimmer Bypass 2

Question 29

Does this module need retractive switches too? I'm guessing yes and it needs 2. View answer

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 30

Is this device suitable for switching 230V LED lights, or would it be better to use the double relay switch instead? Since it doesn't have dry contacts, I'm wondering if the LEDs may flicker while switched off (as is the case for the dimmer module). View answers

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 31

There are plenty of versions for this device. which version are you selling? View answers

Asked 8 ´years ago | Home Assistant Compatible > Z-Wave Remotec AC IR extender

Question 32

Is this waterproof (the main unit, not just the probe), I would like to mount it outside? View answer

Asked 8 ´years ago | Z-Wave Everspring Flood Sensor

Question 33

Will this work outside as a motion detection? View answers

Asked 8 ´years ago | Z-Wave Fibaro Multi Sensor

Question 34

Can this device with Fibaro Home Centre 2? View answers

Asked 8 ´years ago | Z-Wave Qubino Flush Shutter DC

Question 35

Does this work with Vera Lite, using firmware 1.7.855? I'm currently using a LightwaveRF Mood Lighting unit to control my kitchen Sonos but this has more buttons, so would obviously allow me more options. View answers

Asked 8 ´years ago | Z-Wave Remotec Scene Master

Question 36

I look at the instruction manual for the wiring diagrams. I have two wires coming from the wall and it has no wall switch. When I moved in, it had a cheap strip light with shaver socket and its own onboard switch. I have removed this old fitting. I am planning to install an LED strip light running off 12V. I wish to use the Fibaro Dimmer 2 with bypass 2. When I look at the wiring diagram for a 2 wire setup, it assumes I will have a Wall Switch. This makes the diagram useless to me. Can anybody help with an adjusted diagram please? View answer

Asked 8 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 37

I currently have have 1x SRT321 thermostat and 1x SSR303 actuator and ordered a bunch of LC-13 TRV's - however I would need to be able to trigger the boiler if the temperature drops in a room other than where the main SRT321 is located. If I understood the manuals correctly, I shouldn't send the trigger command from my Vera because the SSR303 will go into fail-safe mode if the trigger isn't re-sent within the next hour. So I guess ideally one (or more) SRT321 should be managing the SSR303? So my question is: can multiple SRT321 thermostats be paired with a single SSR303 actuator? View answer

Asked 8 ´years ago | Z-Wave Plus Secure Wall Thermostat with LCD display

Question 38

Will it work with Mydlink hub GCH-G020 ? ( Z-wave secure wall switch) View answer

Asked 8 ´years ago | Z-Wave Plus Secure Wall Switch

Question 39

Can this be configured to control two ACs available in same room at the same time? If yes, are they supposed to match in brand?

Asked 8 ´years ago | Home Assistant Compatible > Z-Wave Remotec AC IR extender

Question 40

Has anyone figured out how to set the light and humidity thresholds? The manual gives parameter values, sizes and hex/decimal descriptions but setting them don't match and the default values don't match the ones in the manuals, they aren't even close. Trying to set values gives me "Failed to set user settings" in my Vera Edge. View answers

Asked 8 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 41

Would this be suitable to monitor whether a sink has water in it or not (so it would be active and the wire submerged regularily?) View answers

Asked 8 ´years ago | Z-Wave Everspring Flood Sensor

Question 42

Has anyone managed to make this work reliably with Samsung SmartThings? View answer

Asked 8 ´years ago | Z-Wave Qubino Flush Shutter DC

Question 43

Can you fit this in the light fitting or does it have to be in the switch socket? I think it probably has to be in the switch but I want to be sure before I start drilling out space behind the switch box. Thanks! View answers

Asked 8 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 44

Which would work better with the Fibaro Dimmer 2? GU5.3 (MR16/12V) LED bulbs or GU10 (240V) LED bulbs? (I'm replacing MR16 halogen bulbs and trying to decide whether to convert to GU10 fittings). View answers

Asked 8 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 45

Is it working with HC2? I have some issues with it. View answers

Asked 8 ´years ago | Z-Wave Qubino Smart Meter ZMNHTD1 Plus

Question 46

Will it work wit fibaro HC Lite? View answer

Asked 8 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 47

What is the range at which the gestures will work over? And are there any materials the Swipe will not work behind, e.g. glass?

Asked 8 ´years ago | Z-Wave Fibaro Swipe

Question 48

The Fibaro Double Switch 2 Gen5 will work with vera plus? View answers

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 49

As far as I know this model like previous models should have "Manager Power" option, but in your site usage it didn't mention it. it realy does not have this option?! View answer

Asked 8 ´years ago | Z-Wave Fibaro Double Switch 2

Question 50

Does this stick battery prevent it from forgetting the network routing? I bought the UZB and whenever i unplug it from the pc or just reboot the pc, all routing is reset and it starts all over again resulting many times in dead nodes.. Is this the correct behaviour? Dow the Aeon stick do the same? View answers

Asked 8 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Browse by Topic

Tools