Question 1

Can this product be used outdoors? View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 2

Can the unit be run from a USB / mains power supply? I don't trust the battery life claims from manufacturers. View answer

Asked 5 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 3

Is this Trisensor replacing the Aeotec Multisensor 6, which has 6 different sensors?

Asked 5 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 4

Do these use the same motion sensor as Aeotec's Multisensor with motion, UV, humidity, vibration, temperature and lux? I'm hoping they don't as the motion sensor in the Aeotec 6-way multisensor is very poor, I have about 5-6 of them and even on the highest setting they often don't detect me even if I walk right up to them and jump around.

Asked 5 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 5

When was this published?

Asked 5 ´years ago | Z-Wave Essentials Book

Question 6

I am using the Fibaro Dimmer 2 to control the main lights in my lounge on S1, and to control the lamps by association in Group 5 which are connected to wall dimmers using S2. I have managed to get it all working, but I would like to connect more than one lamp. I have tried to add a second association but it never seems to stick. I have attempted this with OpenHAB, my main server, and with Domoticz control centre. Can you tell me whether this is possible? From the limited documentation I can find, and my experience with associating other devices, I believe it should be.

Asked 5 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 7

I am looking for a capacitive mono-stable wall switch to be used with a z-wave dimmer module. I'm struggling to find ones which will work as desired as most will not register a long press/hold – instead, they always accept touch as a momentary on/off. What I would like is for it to mimic a mono-stable switch (bell-push) i.e. touch once for on/off and hold for dim up/down, which I know can be set by the Fibaro parameters – but I can't find a capacitive plate wall plate that does this. Note, ideally I'm looking a double switch.

Asked 5 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 8

Hi! This dimmer operate in Europe frequency range? Thanks View answer

Asked 5 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 9

Hi, To control the lights via z-wave do I have to keep this switch always "on"? Or i can control via z-wave regardless of the status of the touch pannel? Thanks, Z View answer

Asked 5 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 10

I currently have a single piece door handle and lock cover on a uPVC door. 1. It looks as though this device only covers the lock - is this assumption right? 2. Does it then need mounting to the door with screws? I'm just a little concerned about more holes in the door... Anyone actually fitted one? A few practical comments would be invaluable. Thanks View answer

Asked 5 ´years ago | Z-Wave and Bluetooth Poly-Control Danalock V3

Question 11

What's the difference between roller shutter 2 & 3? Are there any new features to note?

Asked 5 ´years ago | Z-Wave Fibaro Roller Shutter 3

Question 12

So I have this bulb now, it's connected to my vera plus, I can get it to dim and switch on/off. How to i change the color with in vera. Thanks

Asked 5 ´years ago | Z-Wave Plus Aeotec LED Bulb 6 Multi-White (E27)

Question 13

Im attempting to use this with HomeSeer, has anyone else managed to use a backup & restore function with the same set up ?

Asked 5 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 14

How does this differ from Roller Shutter 2? View answer

Asked 5 ´years ago | Z-Wave Fibaro Roller Shutter 3

Question 15

I've currently got an AEON S2 installed in my Domoticz environment with a fairly large network of devices. Some of them are in pretty inaccessible spaces. I'm now considering changing the controller but I need to be sure that I can transfer the configuration without re-including the devices. Gareth

Asked 5 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 16

Can you use this to update Aeotec firmware using their Window tools?

Asked 6 ´years ago | Z-Wave.Me USB Stick

Question 17

The manual shows this can handle 200A ? I need a single phase meter to cover 100A - will this one work? if not which one will? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 18

Hi, I have recently installed a set of electric gates with intercom. Can I simply wire this into the existing system such that it will behave as before with the added functionality of control via app? I would be using with SmartThings - should I have any concerns about my gates accidentally/unexpectedly opening? Thanks, Declan.

Asked 6 ´years ago | Z-Wave Popp Electronic Door Opener Controlmodule

Question 19

Hello, you did not mention the frequency of z-wave signal? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 20

Can the temperature sensitivity be increased using parameters to change the bit length of the temperature sensor?

Asked 6 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 21

How do I programme the Aeon Labs Clamp meter to record import & export units on Vera Plus?

Asked 6 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 22

what frequency this item is US/EU? View answer

Asked 6 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 23

Is there a reason why this has to be hardwired into the main circuit box panel rather than a plug? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 24

Hi, I've recently purchased one of these devices and installed it on my veraplus. Its created the 'Double Switch 2', Q1 Load, and Q2 Load. On the double switch device, its got the status: Failed at: Setting special association. The 2 load switches appear to work ok. Any ideas how to resolve? Thanks View answer

Asked 6 ´years ago | Z-Wave Fibaro Double Switch 2

Question 25

Hi. How do you set the parameters for the dimmer 2 with tellstick sent Fibaro Dimmer 2 Parameter Setting: The following parameters need to be set: 20 - 1 - enables the dimmer to work with a toggle switch (default is 0 for a momentary switch) 26 - 1 - enables the dimmers S2 switch to also control the dimmer (default 0) Thanks

Asked 6 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 26

Does this unit works with HC2 (Fibaro) or is there any ready made easy integration possible? View answer

Asked 6 ´years ago | RFXtrx433XL USB 433.92 MHz transceiver with antenna (NEW model)

Question 27

Why is this only compatible to the POPP Hub? I thought all Z-Wave devices were compatible. View answer

Asked 6 ´years ago | Popp 433 Bridge - Black

Question 28

Does this switch supports dimmable LED lights? View answer

Asked 6 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 29

I have a British Gas ES1 (Drayton RTS5) thermostat with up to an hour delay on switch-on that requires a press on the ‘Save’ button to bypass the delay. I now have a Secure SRT321 thermostat with a SSR302 boiler control. Although I have turned the ES1 up to the max, I am now subjected to the delay of the ES1 everytime that the SRT321 switches on the heating throughout the day. I am trying to avoid finding the junction box to bridge out the ES1, so would like to reconfigure/bridge the wiring behind the ES1 to cut-out the delay. Has anybody tried this before, or knows how to do it?

Asked 6 ´years ago | Z-Wave Plus Secure Wall Thermostat with LCD display

Question 30

Would this work locally "out of the box" without connecting to a central z-wave controller? I understand remote commands require a controller but would a hardwired momentary switch be able to turn on the load immediately after wiring as well? View answer

Asked 6 ´years ago | Z-Wave Fibaro Double Switch 2

Question 31

Just read the English installation instructions for the Fibaro FGS 223. They state "The device is designed for installation in a wall switch box of depth not less than 600mm." I'm not sure you can get a back box of that depth in the UK. Does this mean we can't use the device in a standard UK box? View answer

Asked 6 ´years ago | Z-Wave Fibaro Double Switch 2

Question 32

Hi, Just to be sure, will it work flawlessly if using while connected only to a single switch? View answer

Asked 6 ´years ago | Z-Wave Fibaro Double Switch 2

Question 33

Hi, I have box with 3 switches controlling 3 lights (one for each). Is it possible to install this module to control one light with S1 and the other 2 lights with S2? the idea is that the controller will open/close the 2 lights together while manually using the physical switches I will still have separate control. Thanks. View answers

Asked 6 ´years ago | Z-Wave Fibaro Double Switch 2

Question 34

Can I connect the module N/L to 230V while Q and I1,2,3 are being used with a 24VDC device? View answers

Asked 6 ´years ago | Z-Wave Qubino Flush Relay x 1 Plus

Question 35

Hi, I can’t see the option to force a set brightness level in Domoticz when switched on, can you please tell me how I change this setting as the default is to switch on at last light level. Thanks, Steve View answers

Asked 6 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 36

Can this be used in a single phase environment to monitor different subset of the grid? (powerpoint, lighting & environmental)? View answer

Asked 6 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - Three Clamps (60A)

Question 37

How easy is it to get these working with smartthings?

Asked 6 ´years ago | Z-Wave Philio Multisensor - Door / PIR / Light / Temp - Gen5

Question 38

I have 18 LEDs at 5w and 0.5 power factor. Would I be able to use the Dimmer 2 if were to use alongside the Bypass 2 or is the wattage too high? Based on the technical resources I think it would overload it but I have seen some responses to questions saying this number of bulbs should be fine. View answer

Asked 6 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 39

Has anyone tried this with the Fibaro dimmer 1? I have a few of the dimmers and have been holding off upgrading to LEDs as you can't get hold of the bypass.

Asked 6 ´years ago | Vision Dimmer Bypass

Question 40

Dear all, Is this model support for Z-Wave directly? Or we should buy one more Z-wave module? Thank you. C??ng. View answer

Asked 6 ´years ago | Yale Keyless Connected Smart Lock - Connected Ready - No Module

Question 41

Hi, looking for some information on these with Smartthings Hub. Does it create a z-wave switch for each button, or do you have to try create virtual switches? Thanks,

Asked 6 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 42

Hi, has anyone had any joy linking with with Samsung Smartthings? Thx

Asked 6 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 43

Hello. Anyone know if these are shipping with more recent firmware these days? I do not have a Fibaro controller, and have no plans to invest in one, so wouldn't be able to update if they aren't already up to date... Thanks.

Asked 6 ´years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 44

Why do you list this as compatible with Anthony Homey? Like many so called compatible brands, Homey relies on 3rd party or community developers to write drivers (they call them Apps), and the various developers haven't added compatibility for this or original Yale Connected Keyfree), despite requests. Now that the lock is discontinued, I doubt it ever will be. View answers

Asked 6 ´years ago | Yale Smart Living Z-Wave Module 2

Question 45

The manual suggests this unit must be installed behind an Air Break Switch. Is this confirmed? As far as I was aware, air break switches are only used in the distribution network?

Asked 6 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 46

Hi, Are these waterproof? Suitable for outdoor use? I am thinking of adding one of these to a wooden garden gate. Thanks View answer

Asked 6 ´years ago | Z-Wave Vision Door Lock without Handle

Question 47

is this using 868.4Hz frequency? View answer

Asked 6 ´years ago | Z-Wave Fibaro Multi Sensor

Question 48

Seeing as this product it battery operated and always monitoring temperature, lux reading and motion detection, how long does a battery typically last on this? View answer

Asked 6 ´years ago | Z-Wave Fibaro Multi Sensor

Question 49

Can someone recommend a good/correct 12/24v Power Supply that I can hook upto the Flood Sensor? Thanks View answer

Asked 6 ´years ago | Z-Wave Fibaro Flood Sensor

Question 50

Can this be used (with the Zipato Zipabox) to perform OTA updates of other devices on the Z-Wave network?

Asked 6 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Browse by Topic

Tools