Question 1

Hi In the picture it’s showing two readings - is one the set point and the other Actual room temp ? Which way round are there Is this compatible with Vera Plus ? View answer

Asked 3 ´years ago | Z-Wave Heatit Thermostat Z-Temp 2

Question 2

Hi, Would anyone have any schematic diagrams to show how to install this device to arm a hardwired and non-smart alarm system? Thanks View answer

Asked 3 ´years ago | Z-Wave Fibaro Smart Implant

Question 3

Just wondering if you shipp to Cyprus,and also would I need a Samsung Smartthings account on a UK address (region) as I saw many comments that this hubs are theoretically for US/UK market ,will it function normally with an European account via the Samsung app? Feedback much appreciated . Thanks View answer

Asked 3 ´years ago | Aeotec SmartThings Hub (V3)

Question 4

Have NorthQ updated this product to a Q-Reader? View answer

Asked 3 ´years ago | Z-Wave Data Logger for E-Meters

Question 5

Dear Vesternet, Works Heatit z-smoke correct with fibaro HC3? Thanks. Enrico Kersten View answer

Asked 3 ´years ago | Z-Wave Heatit Z-Smoke Detector - 230V

Question 6

Do you know when the Hubitat Elevation Model C-7 Hub will be back in stock? View answer

Asked 3 ´years ago | Hubitat Elevation Model C-7 Hub

Question 7

When do you expect these back in stock? It's the only one missing from me placing an order for about 6 units. View answer

Asked 3 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 8

Hi Is it possible to interlink two or more of these Z-Wave smoke sensors ? So when one detects smoke and sounds its siren alarm, to have a second smoke sensor also sound its siren ? I cannot see anything in the user manual and using either Group 1 or 2 association groups doesn't seem to work. Thanks View answer

Asked 4 ´years ago | Z-Wave Plus Heiman Smoke Sensor

Question 9

If the mains adapter is used with this, can the battery still be used as a backup power source if the mains power is cut? View answer

Asked 4 ´years ago | Z-Wave Plus Popp Smoke Sensor with controllable Siren (2-in-1)

Question 10

Philio 2 in 1 Temperature/Humidity Sensor. What is accuracy of measurements? What is battery life if polling every 30 minutes? View answer

Asked 4 ´years ago | Z-Wave Philio 2 in 1 Temperature / Humidity Sensor - Gen5

Question 11

Does this work with Samsung Smarthings? View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 12

Does this require neutral or can it replace a lightswitch in a 2 wire setup? View answer

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Two Buttons - White

Question 13

Hi Is this compatible with an iTec Home Zwave gateway https://www.itechome.co.uk/products ? Thanks View answer

Asked 4 ´years ago | Popp 433 bro - vit

Question 14

Is the logo on the front removable ? View answer

Asked 4 ´years ago | Z-Wave Plus MCO Home Glass Touch Dimmer UK

Question 15

When is this thermostat going to be available? Also, will it work an electric underfloor heating system?

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Heating Thermostat

Question 16

Hello, I'm looking to update my secure 321 Thermostat with something that looks a bit more modern but it needs to be battery driven do you have anything that will work with the secure 2 channel receiver I just purchased from you, thanks View answer

Asked 4 ´years ago | Z-Wave Plus MCO Home Fan Coil Thermostat - 2 Pipe - Black

Question 17

Hi, me again, I asked the below question but gave the wrong terminology. I was referring to the swivel base unit. Thanks Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you Answers (1) Anonymous 28/10/2020 If you mean the recessor adapter ( https://www.vesternet.com/products/z-wave-aeotec-recessor-for-multisensor-6 ) then the dimensions are listed in the product details ( 1.2cm above surface, 4.4cm below surface )

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 18

Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 19

Hello I bought one of these from you a few years ago, I dont think it is zwave plus, are these new ones? thanks View answer

Asked 4 ´years ago | Z-Wave Plus Secure Wall Thermostat with LCD display

Question 20

Will this be able to control 2-way lighting circuits? View answer

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Four Buttons - White

Question 21

Hi, Will this work with Samsung SmartThings, controlling the duo switch independently. If not, can you advise what switches will? Thanks View answer

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Two Buttons - White

Question 22

does this can be use as range extender (mesh). as you know most of z-wave product that work on battery dont transmite to thier Neighbors command but z-wave ac plug product do View answer

Asked 4 ´years ago | Z-Wave Plus Popp Smoke Sensor with controllable Siren (2-in-1)

Question 23

Could I use this to control a 12.5kw shower View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 24

Is this compatible and will reliably work with Vera Secure? View answer

Asked 4 ´years ago | Z-Wave Plus Popp Flow Stop 2

Question 25

Hi I would like to install this into a air conditioning/ heating system would you be able to offer me some assistance if I was to supply you with the make and model no of the Ac/ Heating unit ? View answers

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 26

I have a Danalock and want to remotely open the lock when away from the house, will this allow me to do this on my phone with 4g or do I require to have wifi signal ? View answer

Asked 4 ´years ago | Danalock Danabridge

Question 27

Hi, Will this switch work with gateway such as Vera and Homey? And when do you plan to have it in stock. Thanks! View answer

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Five Buttons - White

Question 28

Is the relay single pole or double pole (ie does it switch only the live connection or both L and N connections)? View answer

Asked 4 ´years ago | Z-Wave Heatit Z-Relay - 25A

Question 29

There is no mention about power supply in the spec or how to use. I assume its batteries? Standard 2032s? View answers

Asked 4 ´years ago | Z-Wave Plus Popp Flow Stop 2

Question 30

I have several of these devices and wish to use them with Home Assistant. I have managed to lose the little document that came with them. Can you tell me what values I should use to know when the sensor has detected smoke, please? Many thanks, John Chapman View answer

Asked 4 ´years ago | Z-Wave Plus Heiman Smoke Sensor

Question 31

Hi do you know if these support Triac dimmable as required by these downlights ? https://www.electrical2go.co.uk/jcc-v50-colour-selectable-fixed-fire-rated-led-downlight-7w-650lm-ip65-white.html Thanks Rob View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 32

Dear Sir i want ask you about the switch in wich frequency do u have it . and do have it in stock . Thanks View answer

Asked 4 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Five Buttons - White

Question 33

Is this the latest 2020 upgraded model (“Z-Stick Gen5&#43“) that will work with a Raspberry Pi 4 directly without the need for an external USB hub?

Asked 4 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 34

I'm looking for a standalone DC power supply to go with this unit. Does anyone here have any recommendations? View answer

Asked 4 ´years ago | Z-Wave Fibaro Smart Implant

Question 35

Could I use this module to control 300w towel radiator View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Relay x 1 Plus

Question 36

Is this just a repeater or does it actually boost signal higher and receive with greater sensitivity than other repeaters such as built into the Aeotec Z-Wave Plus Aeotec Smart Switch 6? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Range Extender 6 - UK Socket

Question 37

has anyone tested it with Fibaro Home Center 2? Does it work ok? View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Shutter Plus

Question 38

Will I be able to use the RaZberry 2 with it's Z-way software as a secondary controller on my Hubitat to analyse Z Wave Network and remove any ghost nodes and troubleshoot any routing issues. I know this is possible with Silicon labs PC controller and a UZB Stick but I do not own a PC. View answer

Asked 4 ´years ago | Z-Wave.me RaZberry 2 PI GPIO Daughter Card - Gen5 - New

Question 39

Is there a UK plug version available? View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Smart Switch 7

Question 40

How long is the sensor lead? and it be lengthened if needed? View answer

Asked 4 ´years ago | Z-Wave Philio Multisensor - Flood / Temp / Humidity - Gen5

Question 41

Will this work in the states? View answer

Asked 4 ´years ago | Athom Homey Pro

Question 42

Would this be able to control non dimmable LEDs? View answer

Asked 4 ´years ago | Z-Wave Plus AEOTEC Dual Nano przełącznik z pomiaru mocy

Question 43

Do you have any info when Aeotec's 700 series Zwave Controller (that they acquired from Popp) is expected to appear. Trying to make an intelligent choice to replace aging Vera unit and leaning towards the Hubitat, mostly because it's the only one available! View answer

Asked 4 ´years ago | Hubitat Elevation Model C-7 Hub

Question 44

Will it be the new c-7 in stock late July ? Do you ship to Sweden? /Mattias View answer

Asked 4 ´years ago | Hubitat Elevation Model C-7 Hub

Question 45

I have a Vera Plus at the moment and am looking to move to the HC3. I use the dataMine2 plugin on Vera for getting graphs of data over time. Does the HC3 have similar functionality? View answer

Asked 4 ´years ago | Fibaro Home Center 3

Question 46

Would you have the UK version (3 pin) version ? Thanks Alan. View answer

Asked 4 ´years ago | Aeotec Range Extender 7 - EU Socket

Question 47

Hi Just a follow-up question about import/export power. Is this able to monitor flow direction from one clamp -> i.e. whether my solar system is exporting or not to the grid? Mitul View answer

Asked 4 ´years ago | Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 48

Hi All After years of trying to find a good zwave remote control I think I might have hit on a good (crazy) idea. Would this module work behind a light switch if there was no output load to control ? My plan is to use something like this https://www.ukelectricalsupplies.com/retrotouch-07100-simplicity-white-2-gang-retractive-light-switch.htm, so i should get the ability to control four scenes, using s1 and s2 Would I be correct that it will work with out a light to control. Thanks Rob View answer

Asked 4 ´years ago | Z-Wave Fibaro Universal Dimmer 2

Question 49

Hi Are there for 2 or 3 wire systems? Does it need a neutral cable? Kind Regards Juan View answer

Asked 4 ´years ago | Z-Wave Fibaro Smart Module

Question 50

Does this module work with the Hunter Douglas M25S 24V motor used in Luxaflex Duette blinds? https://motorisation.hde.nl/wired/24V/Motors/M25S/M25S-data-sheet/M25S-data-sheet.pdf On paper it all looks good but I know sometimes that doesn't work out in practice when motors have soft start/stop View answer

Asked 4 ´years ago | Z-Wave Qubino Flush Shutter DC

Browse by Topic

Tools