Question 1

Can Vesternet or any user provide a config file for OpenZWave? I'm trying to write one but not luck.

Asked 2 ´years ago | Z-Wave Plus Secure Boiler Receiver - two channels

Question 2

Can this unit be controlled by other Z-wave controllers? Is the Smart Meter required for it to function?

Asked 2 ´years ago | Qubino 32A Contactor for Smart Meter

Question 3

Can this be used (with the Zipato Zipabox) to perform OTA updates of other devices on the Z-Wave network?

Asked 2 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 4

Can this be configured to control two ACs available in same room at the same time? If yes, are they supposed to match in brand?

Asked 2 ´years ago | Home Assistant Compatible > Z-Wave Remotec AC IR extender

Question 5

Can the temperature sensitivity be increased using parameters to change the bit length of the temperature sensor?

Asked 2 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 6

Can it be connected to an IPBX (SIP)?

Asked 2 ´years ago | Poly-Control Extendable Security Cylinder for Danalock V3

Question 7

Are there any special instructions for including this in a Vera Edge system. It seemed to install but will only notify about tampering and has no apparent reaction to movement other than a small fashing led. No notifications.

Asked 2 ´years ago | Z-Wave Philio Motion Sensor PSP05 - Gen5

Question 8

Are the actuators (relay wires) really opened for The Bad with crowbar?

Asked 2 ´years ago | Poly-Control Extendable Security Cylinder for Danalock V3

Question 9

Is this work with Samsung Smartthing V3 hub? Can I control the switch using google assistant via Samsung Smartthing Hub v3?

Asked 2 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 10

Does anyone know the trick to getting full functionality (press, press and hold, double press etc.) working with Domoticz?

Asked 2 ´years ago | Z-Wave Remotec Scene Master

Question 11

Does this support MQTT ? View answer

Asked 2 ´years ago | Hubitat Elevation Model C-7 Hub

Question 12

Hi, can this operate as a simple on/off switch without the dimmable feature? Thanks in advance. View answer

Asked 2 ´years ago | Z-Wave TKB Single Paddle Wall Dimmer TZ35S - Gen5

Question 13

Is the Z-Wave Plus Philio Outdoor Siren compatible with 2nd gen ring alarm system? View answer

Asked 2 ´years ago | Z-Wave Plus Philio Outdoor Siren

Question 14

What sort of housing would you recommend for this? Would a standard UK single pattress box be suitable? View answer

Asked 2 ´years ago | Vesternet Z-Wave High Load Switch

Question 15

What's the difference between this and the 2.5 apart from bluetooth? View answer

Asked 2 ´years ago | Shelly 2PM PLUS

Question 16

Is it working in israeli z wave? 916 mhz View answer

Asked 2 ´years ago | Z-Wave and Bluetooth Poly-Control Danalock V3

Question 17

If powered by USB, can the batteries be left in to cover a power failure? View answer

Asked 2 ´years ago | Z-Wave Plus Aeotec MultiSensor 7

Question 18

AB - Is it possible to wire this to a momentary wall switch? I understand this will invalidate the warranty View answers

Answer posted 2 years ago | Z-Wave Fibaro Button

Question 19

AB - The uses states security gates, does this mean it's waterproof and suitable for outdoor use now? View answers

Answer posted 2 years ago | Z-Wave Fibaro Universal Door & Window Sensor 2

Question 20

The uses states security gates, does this mean it's waterproof and suitable for outdoor use now? View answers

Answer posted 2 years ago

Question 21

Is it possible to wire this to a momentary wall switch? I understand this will invalidate the warranty View answers

Answer posted 2 years ago

Question 22

The uses states security gates, does this mean it's waterproof and suitable for outdoor use now? View answers

Answer posted 2 years ago

Question 23

Is it possible to wire this to a momentary wall switch? I understand this will invalidate the warranty View answers

Answer posted 2 years ago

Question 24

High load switch requires three wires? View answer

Asked 2 ´years ago | Vesternet Z-Wave High Load Switch

Question 25

Vesternet zigbee switch/dimmer - Compatibility with hue bulbs? View answer

Asked 2 ´years ago | Vesternet Zigbee Switch

Question 26

Staircase Switches View answer

Asked 2 ´years ago | Z-Wave Plus MCO Touch Panel Switch - Two Load

Question 27

confusion regarding model View answer

Asked 2 ´years ago | Z-Wave Plus Secure Wall Thermostat with LCD display

Question 28

My gates have a pair of IR photocells. Could I input this to the implant to get a notification when beam is broken? View answer

Asked 2 ´years ago | Z-Wave Fibaro Smart Implant

Question 29

Is this available with a UK plug? The pictures show European power pins. View answer

Answer posted 2 years ago | Aeotec Zigbee Range Extender Zi

Question 30

Which Version are you selling, I see you list 3 Spec for different regions but which one am i ordering? View answer

Answer posted 2 years ago | Z-Wave Plus Aeotec Z-Pi 7

Question 31

Is this available in EU frequency? Shows US on the back of the box. Are the relays good for 240V AC? View answer

Answer posted 2 years ago | Z-Wave Fibaro Radiator Thermostat Starter Pack

Question 32

Is this available in EU frequency? Shows US on the back of the box.Are the relays good for 240V AC? View answer

Answer posted 2 years ago | Z-Wave Plus Zooz Universal Relay

Question 33

hi, will the Aeotec Smart Home work when there is no broadband connection?I am concerned that I will not be able to control things at my home when the internet is down. View answers

Answer posted 2 years ago | Aeotec SmartThings Hub (V3)

Question 34

hi, will the Aeotec Smart Home work when there is no broadband connection? I am concerned that I will not be able to control things at my home when the internet is down. View answers

Answer posted 2 years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 35

Do these strips actually have a z-wave controller as the category description states, or are they just dumb LED strips that need a z-wave controller and a power supply?Thanks View answer

Answer posted 2 years ago | LED Light Strip Warm White - 2700 Kelvin

Question 36

Do these strips actually have a z-wave controller as the category description states, or are they just dumb LED strips that need a z-wave controller and a power supply? Thanks View answer

Answer posted 2 years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 37

Hi, I wonder if I can connect this strip directly to the wire? I don't see in the advertisement any explanation how can I connect this strip. I would also like to make sure this strip can work directly with Smartthings and will not require additional hub. Regards, Gal View answer

Answer posted 2 years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 38

Hi,I wonder if I can connect this strip directly to the wire?I don't see in the advertisement any explanation how can I connect this strip.I would also like to make sure this strip can work directly with Smartthings and will not require additional hub.Regards,Gal View answer

Answer posted 2 years ago | Zigbee Aduro Led Strip 3 Meters

Question 39

Hello, Will the black version be available to buy in the near future? View answer

Answer posted 2 years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 40

Hello,Will the black version be available to buy in the near future? View answer

Answer posted 2 years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Five Buttons - White

Question 41

Is this the EU version (868 MHz)? View answer

Answer posted 2 years ago | Yale Smart Living Z-Wave Module 2

Question 42

What frequency are this controller (Z-Wave.Me RaZberry 7 Pro (with external Antenna)) using? EU or US.RegTrygve View answer

Answer posted 2 years ago | Z-Wave.Me RaZberry 7 Pro (with external Antenna)

Question 43

What frequency are this controller (Z-Wave.Me RaZberry 7 Pro (with external Antenna)) using? EU or US. Reg Trygve View answer

Answer posted 2 years ago | LED Light Strip Warm White - 2700 Kelvin

Question 44

could you use this with an existing wired door bell to replace the sounder? View answer

Answer posted 2 years ago | Z-Wave Fibaro Smoke Sensor

Question 45

Will this fit in a recessor AEO_DSE010 View answer

Answer posted 2 years ago | Z-Wave Plus Aeotec Z-Pi 7

Question 46

Does anyone know if these are 100kbps devices? The original universal binary sensor was 40k View answers

Answer posted 2 years ago | Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 47

Did it include the Rechargeable Lithium Battery in the package? View answer

Answer posted 2 years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 48

Hi, anyone using it with Athom Homey ? Does it show correctly both the power and energy ? Non-USB version of the UK plug is not showing the power at all .. View answer

Answer posted 2 years ago | Z-Wave Qubino Flush Relay x 1 Plus

Question 49

Can this be configured so that when the switch is off then power is still sent to the light bulb? I have a smart light bulb and I want to be able to use this switch to send the command to turn on and off the light and also be able to turn the smart light bulb on through an app even if the switch is off. View answer

Answer posted 2 years ago | Z-Wave Qubino Flush Relay x 2 Plus

Question 50

Can this be configured so that when the switch is off then power is still sent to the light bulb?I have a smart light bulb and I want to be able to use this switch to send the command to turn on and off the light and also be able to turn the smart light bulb on through an app even if the switch is off. View answer

Answer posted 2 years ago | Z-Wave TKB Single Paddle Wall Dimmer TZ35S - Gen5

Browse by Topic

Tools