Question 1

How is this different from the earlier version? View answer

Asked 3 ´years ago | Z-Wave Plus Heiman Smart Smoke Sensor 2

Question 2

Hi, is it possible to remove the logo from the front easily? View answer

Asked 3 ´years ago | Z-Wave Plus MCO Home Glass Touch Dimmer

Question 3

Hi, is this compatible with Futurehome smarthub? (Model: CUBE-1V1-EU) View answer

Asked 3 ´years ago | Z-Wave Plus Eurotronic Air Quality Sensor Z-Wave Plus (VOC Sensor)

Question 4

How do these behave after a power cut is restored? Can the behaviour be configured like hue bulbs, for example last state? Thanks.

Asked 3 ´years ago | Zigbee Aduro B22 Bulb - Tunable Colour

Question 5

Hi would this be compatable with a wired ring video doorbell to allow me to open a gate remotely View answer

Asked 3 ´years ago | Z-Wave Popp Electronic Door Opener Controlmodule

Question 6

what is the z-wave frequency, i assume it is 868mhz? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Range Extender 6 - UK Socket

Question 7

Hi, I have one of these (SCS317) and haven't had much success adding it in to my Homey network, other than a generic device. Any advice or tips on how to add this would be gratefully received. Thanks View answer

Asked 3 ´years ago | Z-Wave Plus Secure 7 Day Programmable Room Thermostat

Question 8

Hello, I have many facilities in different places {hundreds} and I want to manage the entry permits for different suppliers. I would be happy if you get back to me how can this be done? asaf cohen View answer

Asked 3 ´years ago | Poly-Control Extendable Security Cylinder for Danalock V3

Question 9

This says Pi4 compatible but in the supporting documentation it says "not without un-powered USB hub)". Some have said that this is the latest version of this Z-stick but according to the Aeotec site there is a later version called Aeotec Gen5+ which is compatible with a Pi4 without having to use a USB hub. Anyone able to clarify this please? View answers

Asked 3 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 10

I see you only have the EU version in stock. What is the difference to the UK version, is it just the plug? ie could I simply put a UK plug on an EU version or use an adapter? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Doorbell 6

Question 11

Would this work with a LightwaveRF Hub? View answer

Asked 3 ´years ago | Z-Wave Remotec Scene Master

Question 12

Is it support EU frequency (868.42)? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Trisensor

Question 13

Does this 'smart cable' have a physical power switch, similar to the discontinued Swwidinter zwave cord switches, or is it remote control only.

Asked 3 ´years ago | Zigbee Frient Smart Cable 2

Question 14

What’s the rated inductive load in amps for this? Many thanks. View answer

Asked 3 ´years ago | Zigbee Frient Smart Cable 2

Question 15

Does this integrate into smasung smartthings like the fire detector? View answer

Asked 3 ´years ago | Zigbee Frient Intelligent Heat Alarm

Question 16

Do you have to have smartthings to go with this bridge or does the bridge connect directly to to my WiFi router ? Thank you View answer

Asked 3 ´years ago | Danalock Danabridge

Question 17

I plan to use these for patio and window drop-arm awnings. The awning company supply the following motors: - the awning uses a Somfy Orea WT 35/17 - the drop arms use a Somfy Orea WT 15/17 Can anyone advise whether these Fibaro Roller Shutter 3s are compatible and if there is anything in particularly that I need to be alert of in installing? View answer

Asked 3 ´years ago | Z-Wave Fibaro Roller Shutter 3

Question 18

I have several Qubino Mini Dimmer modules in my current set up - HomeSeer with Aeotec Z-Stick controller. Can I substitute one of these for the Qubino module? View answer

Asked 3 ´years ago | Vesternet Z-Wave Dimmer

Question 19

Hi, I was wondering if this would work with Economy 7 electricity, meaning does it have an internal battery to keep it on and connected to the network when economy 7 isn't active? I'm wondering if it is possible to make economy 7 storage heaters smarter. Thanks. View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Heavy Duty Outdoor Switch

Question 20

Hi. Would I be able to use this at the same time as a Razzberry board or do they both require the same part of the gpio header (Pi3)? View answer

Asked 3 ´years ago | Zigbee Popp ZB-Shield

Question 21

Is there a battery included, just so I know if i need to order a seperate one or not, Thanks. View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 22

Hi, I'm assuming I'll be able to control the Zigbee Popp Smart Thermostat via my Homey Hub. Can you confirm please? Many thanks David View answer

Asked 3 ´years ago | Zigbee Popp Smart Thermostat

Question 23

Can these alarms link together, so if one senses smoke they all go off? View answer

Asked 3 ´years ago | Z-Wave Plus Heiman Smart Smoke Sensor 2

Question 24

Will the switch send instant status updates back to Vera? To answer the review where this wasn't working I ended up finding the solution here https://community.ezlo.com/t/heltun-he-tps04-and-vera-lite-experience/217229

Asked 3 ´years ago | Z-Wave Plus V2 Heltun Touch Panel Switch - Four Buttons - White

Question 25

Hi, can this camera send images/video to my PC using FTP or some other protocol? View answer

Asked 3 ´years ago | Aeotec SmartThings Cam 360

Question 26

What is the length of the new Q-Reader lead between the pulse module and the data logger. I have a long distance (approximately 22m) between the meter (located next to road) and the house and propose to connect the pulse module to the requisite cores of a CAT5e cable (already laid underground) and then connect the Q-Reader within the house where it can connect via z-wave to my hub. Is this proposal possible if the cable is not long enough? View answer

Asked 3 ´years ago | Z-Wave Data Logger for E-Meters

Question 27

Is this also compatible with the Raspberry Pi 400 running Home Assistant? Or is there a suitable alternative I should look at? View answers

Asked 3 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 28

Is this the latest (2019, green) version of this board, or the slightly earlier (2018, blue) version? Obviously the photo shows a blue one, but good to know for sure! View answer

Asked 3 ´years ago | Z-Wave.me RaZberry 2 PI GPIO Daughter Card - Gen5 - New

Question 29

They were £24.99 before now £34 I'd call that a big difference.

Asked 3 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 30

Why has the prices gone up so much for what is just a rebrand. View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 31

Is it resistant to condensation/waterproof? What is the operating humidity range? View answer

Asked 3 ´years ago | Z-Wave Fibaro Multi Sensor

Question 32

Does it include an acceleration sensor (accelerometer or any kind of vibration sensor) for door knocker detection? View answer

Asked 3 ´years ago | Z-Wave Technisat Door/Window Sensor

Question 33

Would this work with an existing KwikSet deadbolt? Thanks. View answer

Asked 3 ´years ago | Z-Wave and Bluetooth Poly-Control Danalock V3

Question 34

Hello, I bought it a month ago. What estimated date will it there be stock? When will I receive it? View answer

Asked 3 ´years ago | Aeotec SmartThings Cam 360

Question 35

Can you confirm I would receive the newer version of the ZMNHOD1 module? With updated flash And S7 firmware. The older ones have H1S5P1 printed on the sticker after the model number ZMNHOD1, these cannot be updated to the S7 firmware. Thanks View answer

Asked 3 ´years ago | Z-Wave Qubino Flush Shutter DC

Question 36

Is it compatible with google assistant? Can I stream it through a Google Nest Hub?

Asked 3 ´years ago | Aeotec SmartThings Cam 360

Question 37

Hi, is this smoke detector compatible with Samsung SmartThings Hub? View answer

Asked 3 ´years ago | Homey Bridge Compatible > Z-Wave Plus Abus Z-Wave Smoke Sensor

Question 38

Available as UK three pin yet? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Smart Switch 7

Question 39

When will this item be in stock? View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 40

When will this items be on stock :AEOTEC Smartthings motion sensor,door sensor, button ,etc. View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Multipurpose Sensor

Question 41

Hello, I have an issue with Hubitat's z-wave range, does this device also function as a z-wave repeater? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Nano Dimmer

Question 42

How long is the mains cable please? View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec Siren 6

Question 43

Is the Aeotec motion sensor the same as the Samsung in terms of range and sleep time after detecting motion? View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Motion Sensor

Question 44

When will smart buttons will be in stock I have one on order about 8 weeks approx and want to order more items all out of stock In antisipation Harvey View answer

Asked 3 ´years ago | Zigbee Aeotec SmartThings Button

Question 45

Is this device the same as the Z wave Gen 5 +? The Gen 5 (older version) is not compatible with Raspberry Pi, however, the Gen 5 + is, refer Aeotec info: https://aeotec.com/z-wave-usb-stick/ View answer

Asked 3 ´years ago | Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 46

Will this pair with the ring alarm system for use in the uk View answer

Asked 3 ´years ago | Z-Wave Plus Heiman Smart Smoke Sensor 2

Question 47

Hi, do I need the switches (as shown in the video) ? Or can I just set up some scenes in my homecentre? View answer

Asked 3 ´years ago | Z-Wave Fibaro RGBW Controller 2

Question 48

How close does the door open sensor need to be to the main unit? View answer

Asked 3 ´years ago | Z-Wave Philio Multisensor - Door / PIR / Light / Temp - Gen5

Question 49

As this can be powered from a 5V supply, and I already have wiring in place bringing 12V to existing alarm system sensor locations, does anyone know if there is an off-the-shelf 12V -> 5V converter that will do the job? There is a reference to such a thing in a question from 2017, but nothing that I can find to buy off-the-shelf. Thanks! View answer

Asked 3 ´years ago | Z-Wave Plus Aeotec MultiSensor 6

Question 50

Is there any reason why these Fibaro Roller Shutter 3 models will not work with a 4 wire 230V AC curtain motor (open, close, neutral, earth)? View answer

Asked 3 ´years ago | Z-Wave Fibaro Roller Shutter 3

Browse by Topic

Tools